Abstract:The oxygen carriers (OCs) have recently been investigated for application in biomass chemical looping gasification. This research focuses on the reduction kinetics of newly developed iron ore-based OC pellets during the gasification of radiata pine sawdust. The solid-solid reaction between the OC and residual char mainly occurs at temperatures between 900 and 1195 °C with two successive reduction reactions (Fe2O3 → Fe3O4 → Fe), exhibited as two consecutive peaks in the differential thermogravimetric (DTG) curve. Gaussian peak fitting characterises these two peaks to separate them into two independent processes by assuming a final weight for the first peak and an initial weight for the second peak. Consequently, the Malek method, a model-fitting approach, can be applied to determine the kinetic mechanisms for each stage. The results obtained from the Flynn-Wall-Ozawa method, a model-free method, are consistent with the kinetic parameters from the above model-fitting work. The conclusion from the above separate study is validated by treating the two peaks above as a whole process using the Coats-Redfern method, also a model-fitting method. According to the final validation results, the reduction of OC pellets by char is dominated by random nucleation and nuclei growth for the conversion degree (α) from 0.05 to 0.6, which covers the first solid-solid reaction and the initial second solid-solid reaction. Subsequently, the reduction mechanism is shifted to chemical reaction for the α value from 0.6 to 0.95. The corresponding activation energies for these two reaction mechanisms are 698.28 (Avrami-Erofeev equation, 2/3 order) and 847.01 kJ·mol-1 (Reaction order, 5/2 order). The complex crystalline structure of OC pellets is associated with the kinetics results.

Reduction kinetics of iron-based oxygen carriers using methane for chemical-looping combustion

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Stepwise Reduction Kinetics of Iron-Based Oxygen Carriers by CO/CO 2 Mixture Gases for Chemical Looping Hydrogen Generation

Titania-supported iron oxide as oxygen carrier for chemical-looping combustion of methane

The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2

Non-Isothermal Reduction Kinetics of Iron Ore-Based Oxygen Carrier Materials for Biomass Chemical-Looping Gasification

Carbon Deposition During Reduction in Chemical-Looping Combustion with Fe-based Oxygen Carriers

Activation Mechanism of Fe2O3-Al2O3 Oxygen Carrier in Chemical Looping Combustion

Identifying Iron-Based Oxygen Carrier Reduction During Biomass Chemical Looping Gasification on a Thermogravimetric Fixed-Bed Reactor

Reduction of Iron Oxide as an Oxygen Carrier by Coal Pyrolysis and Steam Char Gasification Intermediate Products

Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Reduction Rate Enhancements for Coal Direct Chemical Looping Combustion with an Iron Oxide Oxygen Carrier

Microscopic insights into the reaction mechanism of Fe-based oxygen carrier with CH 4 in chemical-looping combustion

Redox degrees of iron-based oxygen carriers in cyclic chemical looping combustion using thermodynamic analysis

Reduction Mechanism of Iron Titanium Based Oxygen Carriers with H-2 for Chemical Looping Applications - A Combined Experimental and Theoretical Study

Reactivity of Iron-based Oxygen Carriers Prepared by Wet and Dry Mixing Methods for Hydrogen Production Via Biomass Derived Syngas Chemical Looping

MgO–Kaolin-Supported Manganese Ores As Oxygen Carriers for Chemical Looping Combustion

Near 100% CO selectivity in nanoscaled iron-based oxygen carriers for chemical looping methane partial oxidation

Oxidization and Reduction Kinetics of a Manganese Oxygen Carrier Granulated with the Spray Drying Method at a Tonnage Scale for Chemical Looping Combustion