Abstract:The improved mechanical performance of concrete-filled steel tube (CFST) components has led to their widespread application in megastructures. Therein, CFST hybrid arch bridge has become an optimal selection of large span bridges. Nonetheless, for massive concrete poured in CFST members with large diameter, the thermal cracking and sustained rising temperature caused by early hydration heat of core concrete are urgently required to be studied. The two large-diameter CFST columns in this work, each having a diameter of 2.1 m, had their temperature and strain fields recorded in-situ . An existing CFST arch bridge served as the model for the two CFST columns’ design. Additionally, early-age characteristics of several scaled CFST columns with varying diameters were documented. A multi-field finite element (FE) model that combines linked chemical (hydration), heat, and mechanical fields is suggested in order to properly characterize the evolutions of temperature and strain fields. The model is validated by comparing the in-situ measurements with the numerical results. Finally, to investigate the affect factors on the hydration temperature of core concrete in CFST columns, early-age hydration behaviors of CFST columns was simulated using the validated FE models input parameters as water to cement ratio (w/c), cement dosage, heat release of cement and diameter of CFST columns. Based on the numerical results under the input parameters mentioned, the LSTM neural network was constructed, and the hydration temperature variances computed by FE models were selected as the input dataset. Afterwards, the temperature variance of core concrete of CFST columns was predicted using the established LSTM network. It is discovered that the LSTM neural network that was previously constructed was able to predict the peak temperature of CFST columns as well as the hydration temperature of CFST specimens with respect to time.

Thermal Stress Analyses and Reinforcement Design of Massive RC Structures

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Experimental Study on Early-Age Crack of RC Using TSTM

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Structural behaviors evaluation of RC beam under frost damage - A methodology with meso-macro material/bond simulation and integrating into structural analysis

Modeling of Temperature Distribution in a Reinforced Concrete Supertall Structure Based on Structural Health Monitoring Data

Experimental and Analytical Investigation of Crack Spacing and Width for Overlaid RC Beams at Elevated Temperatures

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Xfem for Thermal Crack of Massive Concrete

Factors affecting the thermo-chemo-mechanical behaviour of massive concrete structures at early-age

Numerical Method for Creep Analysis of Strengthened Fatigue-Damaged Concrete Beams

Assessment and mitigation of early-age cracking for on-site concrete structures by a combined scheme using Temperature Stress Testing Machine (TSTM) and long-span restraining frame

Application of thermo-hydro-chemo-mechanical model for early age behaviour of concrete to experimental massive reinforced structures with strain–restraining system

Restraint degree concept in analysis of self-induced stress of massive RC structures

Early-age stress analysis of a concrete diaphragm wall through tensile creep modeling

Application of Distributed Temperature Sensing for Cracking Control of Mass Concrete

Experimental Study and Neural Network Predictions of Early-Age Behavior of Microexpansion Concrete in Large-Diameter Steel Tube Columns

Estimation of Thermal Stresses in the Field Test under the Restraint Method