Pretreatment of Copper Anode Slime with Alkaline Pressure Oxidative Leaching

Weifeng Liu,Tianzu Yang,Duchao Zhang,Lin Chen,Younian Liu

DOI: https://doi.org/10.1016/j.minpro.2014.03.002

2014-01-01

International Journal of Mineral Processing

Abstract:Pretreatment is crucial in the process of extracting precious metals from copper anode slime. In this study, alkaline pressure oxidative leaching (APOL) followed by sulfuric acid leaching (SAL) was employed to pretreat copper anode slime. The effects of variables in APOL on leaching ratios of different metals were investigated in detail. Under the optimum conditions using NaOH solution of 2.0mol/L, a temperature of 200°C, an oxygen partial pressure of 0.7MPa, a time of 3h, a liquid-to-solid ratio of 5:1 and a stirring speed of 750r/m, the leaching ratios of selenium and arsenic reached up to 99.0%, and that of lead was only 3.0%. Copper, tellurium and silver were not dissolved in alkaline solution. The alkaline residue was then treated with sulfuric acid solution at fixed conditions, and the leaching ratios of copper, tellurium and silver were 95.0%, 77.5% and 10.0%, respectively. The analysis results of X-ray diffraction (XRD) analysis and calculation revealed that the phase of lead sulphate in copper anode slime was easily transformed into lead hydroxide, but barium sulfate did not.