Abstract:The separation of the gas and liquid in the gas-liquid cyclone separator is achieved through the swirling flow. The liquid film flow characteristics and the dynamics of droplets impacting the liquid film are very important for the separation performance, but these phenomena have not been well understood in the swirling flow. In this work, an experiment was conducted to investigate the liquid film flow and droplet impingement in the annular channel of the gas-liquid cyclone separator. Three regions of the annular channel could be divided based on the film flow patterns, which were the inlet region, the annular region, and the outlet region; and four typical droplet impact outcomes could be observed, which were splashing, coalescence, bouncing, and jet breakup. According to the characteristics of the liquid film and the outcome of droplet liquid film impingement, if the droplet splashing in the inlet region could be weakened and the length of the annular region was lengthened, it would be beneficial for gas-liquid separation. The impact outcomes were shown to undergo a transition from bouncing to coalescence as the droplet Weber number increased. Droplet coalescence was affected by the disturbance of gas flow and the evenness of the liquid film, so when the superficial velocity of the gas flow was fixed, the transition boundary was constant whatever the liquid volume fraction in the channel, and when the Reynolds number of the gas flow increased, the transition boundary of droplet Weber number increased first and then decreased. This work may provide a basis for a comprehensive understanding of the liquid film flow pattern and droplet behavior in the cyclone separator, and the results have the potential to be applied in other multiphase studies.

Numerical Study on the Penetration of Droplets in A Zigzag Demister

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Study of the separation efficiency of a demister vane with response surface methodology

Research on enhancing separation of ultra‐fine droplets using turbulators between adjacent demister plates in WFGD systems

Numerical Investigation on Droplet Collision Phenomena in Moisture Separators Using Population Balance Model under Lagrangian Framework

Effects of operating conditions on droplet deposition onto surface of atomization impinging spray

Numerical Simulation on the Performance of Axial Vane Type Gas-Liquid Separator with Different Guide Vane Structure

Numerical study of gravity separation of droplets in gas-liquid separation space of scrubbing-cooling chamber

Droplets Statistics Model for Water Entrainment in The Separation Zone of the Compound Bubbling Chamber

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Investigation on the Oil–gas Separation Efficiency Considering Oil Droplets Breakup and Collision in a Swirling Flow

Numerical Investigation on Performance of Moisture Separator: Experimental Validation, Applications and New Findings

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator

NUMERICAL STUDY ON SWIRLING FLOW AND SEPARATION PERFORMANCE OF SWIRL VANE SEPARATOR

Study on separation abilities of moisture separators based on droplet collision models

NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON EVAPORATION CHARACTERISTICS IN MULTI-SPOUTED BED

Numerical Study on the Flow Field and Separation Efficiency of a Rotary Drum Separator

Numerical study on momentum transfer between droplets and carrier phase in wave type plate separators

Experimental Investigation of Oil Film Flow and Droplets Behavior in the Annular Channel of a Cyclone Separator

Numerical investigation on performance of moisture separator by Lagrangian-Eulerian strategy: Physical mechanisms, theoretical models, and advanced algorithms

Numerical analysis of a novel cascading gas-liquid cyclone separator