Abstract:This paper presents experimental studies and numerical simulations of circular reinforced concrete (RC) columns wrapped with Polyethylene Naphthalate fiber reinforced polymer (PEN FRP, a kind of large-rupture-strain FRP) and conventional CFRP. A total of seven columns were designed and fabricated, including a control column, three columns strengthened with CFRP, and three columns strengthened with PEN FRP. All columns were subjected to cyclic lateral load and a constant high axial load. The effectiveness of PEN FRP strengthening was systematically analyzed and discussed regarding the failure mode, displacement ductility, lateral cyclic load–displacement curve, stiffness degradation and energy dissipation capacity. The test results indicated that the control column exhibited inferior ductility and peak lateral strength, while FRP-strengthened columns possess better energy dissipation capacity and ductility. Further study found that PEN FRP was preferred to CFRP with similar tensile stiffness in seismic strengthening. Finally, based on the cyclic compression model of LRS FRP-strengthened concrete, the improved tensile model of FRP-strengthened concrete, and the cyclic stress–strain model of reinforcing steel, numerical simulations for seismic performance were carried out in OpenSees . It was found that the numerical simulation results of all FRP-strengthened RC columns were in excellent agreement with the test results. To better understand the effect of FRP confinement stiffness on the seismic performance of circular columns, parametric analysis was performed. Results showed that the numerical simulations need to consider the buckling of longitudinal reinforcement for accurately predicting the seismic behavior of FRP-strengthened columns of lower confinement stiffness.

Design-Oriented Modeling of Circular Frp-Wrapped Concrete Columns after Sustained Axial Compression

Theoretical Model for Slender FRP-confined Circular RC Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Behavior and Three-Dimensional Finite Element Modeling of Circular Concrete Columns Partially Wrapped with FRP Strips

Axial Compressive and Seismic Performance of GFRP Wrapped Square RC Columns with Different Scales

Numerical studies on the performance of the circular fibre reinforced plastics-concrete filled steel tubes stub column under axial compression

Elastoplastic Approach for Studying the Behavior of FRP Confined Wood Column under Axial Compression

Behavior and modeling of partially CFRP confined reinforced concrete columns under axial compression

Experimental Study on the Impact of Using FRP Sheets on the Axial Compressive Performance of Short-Circular Composite Columns

Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio

Behaviors of FRP confined rectangular concrete-filled thin-walled steel tubular stub columns using high-strength materials under axial load

Axial Compression Performance of FRP Tube-Steel Tube Confined Concrete Composite Columns

Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP

Experimental-numerical study on axial compression performance of square concrete columns confined by new-type BFRP