Abstract:Concrete-filled steel tube (CFST) columns are widely used in civil engineering because of their excellent bearing capacity; however, the reinforcement of CFST columns lacks effective measures. To strengthen CFST columns quickly and effectively, two methods, namely, winding FRP (fiber reinforced polymer) or steel strips, were explored in this work. Two unconfined CFST columns, eight FRP-strengthened CFST columns and four welded steel strip-strengthened CFST columns were manufactured and tested. The failure modes and axial load–strain curves of all specimens under compression load were concluded and compared. The effects of the primary parameters, such as FRP layers (1, 2, 3 and 4 layers) and steel strip thickness (3.0 and 6.0 mm), on the bearing capacity and deformation capacity were also investigated. The ultimate load of CFST columns increased from 28.72 to 64.16% after being confined by FRP with one to four layers. The ultimate load of the welded steel strip-strengthened CFST column with 3.0 mm steel strips and 6.0 mm steel strips increased by 28.46% and 49.82%, respectively, compared with the unconfined CFST column. Thus, the increase in FRP layers and steel strip thickness can markedly improve the compressive behavior of the FRP/welded steel strip-strengthened CFST columns. The cost performance of the two different reinforcement methods also showed that the cost of the welded steel strip-strengthened CFST column is nearly 40% of that of the FRP-strengthened CFST column when the same strengthening effect was obtained, which indicated that the welded steel strip-strengthened CFST column is more cost-efficient than CFST columns confined by FRP. Finally, six existing models for the ultimate load of FRP-strengthened CFST columns were presented and evaluated. From the evaluation results, the Zhang et al.'s model, Lu et al.'s model and Hu et al.'s model for FRP-strengthened CFST columns were shown to provide the best applicability and accuracy. Based on the Mander et al.'s model, a model for the ultimate load of welded steel strip-strengthened CFST columns was proposed and evaluated. The proposed model can accurately predict the ultimate load of welded steel strip-strengthened CFST columns.

Behavior and modeling of partially CFRP confined reinforced concrete columns under axial compression

FRP Spiral Strip-Confined Concrete Columns: Stress-strain Behavior and Size Effect

Theoretical Model for Slender Frp-Confined Circular Rc Columns

Compressive Behavior of CFRP-Confined Recycled Aggregate Concrete in Different-Sized Circular Sections (vol 17, pg 313, 2020)

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Experimental Research on Large-scale Square Columns Confined with Wrapped CFRP under Axial Compressive Load

CFRP-confined square RC columns. I: Experimental investigation

Behaviour of CFRP strips confined partially encased concrete columns under axial compressive load

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Behavior and Three-Dimensional Finite Element Modeling of Circular Concrete Columns Partially Wrapped with FRP Strips

Experimental investigation into FRP-confined concrete-filled steel tubular columns under axial compression

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Experimental study on the mechanical properties of concrete canvas and CFRP jointly confined circular concrete columns under axial compression

Compressive behavior of concrete confined by CFRP and transverse spiral reinforcement. Part A: experimental study

Behavior of Large-Scale Circular and Square Rc Columns Confined with Carbon Fiber-Reinforced Polymer under Uniaxial Compression

Stress-strain behavior and design-oriented model for FRP spiral strip-confined concrete

Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression

Experimental and Theoretical Study of Concrete-Filled Steel Tube Columns Strengthened by FRP/Steel Strips Under Axial Compression

Experimental Study on the Impact of Using FRP Sheets on the Axial Compressive Performance of Short-Circular Composite Columns

Experimental behavior of reinforced concrete columns confined with carbon-FRCM composites