Preparation and Performance of Solid Oxide Fuel Cells with YSZ/SDC Bilayer Electrolyte

Zhen Wang,Xiqiang Huang,Zhe Lv,Yaohui Zhang,Bo Wei,Xingbao Zhu,Zhihong Wang,Zhiguo Liu

DOI: https://doi.org/10.1016/j.ceramint.2014.11.131

IF: 5.532

2014-01-01

Ceramics International

Abstract:YSZ (Y2O3-stabilized ZrO2)/SDC (Sm-doped CeO2) bilayer electrolyte film was successfully fabricated on NiO/YSZ anode substrate using stepwise sintering processing by screen-printing technique. OCVs (open-circuit voltages) of 1.06V, 1.05V and 0.88V were achieved at 750°C for single cells with bilayer electrolyte of 12μm-SDC/8μm-YSZ, 12μm-SDC/5μm-YSZ, and 12μm-SDC/2μm-YSZ, respectively. Interdiffusion of ions at YSZ/SDC interface and formation of YSZ–SDC solid solution after sintering at 1400°C for 2h was investigated. The EDX result suggested that the region for the interdiffusion in a YSZ/SDC bilayer structure was 2.0μm from the YSZ/SDC interface into the YSZ layer for Sm and Ce, and 0.5μm into the SDC layer for Zr and Y. The YSZ–SDC solid solution exhibited a low electrical conductivity, which negatively affected the performance of single cell. After two thermal cycles, the maximum power density of the single cell exhibited a significant decrease. The destruction of YSZ/SDC bilayer electrolyte structure was not observed during the thermal cycles.