Three‐phase borate solid solution with low sintering temperature, high‐quality factor, and low dielectric constant
Rui Peng,Yuanxun Li,Hua Su,Yongcheng Lu,Liang Shi,Guoliang Yu,Gang Wang,Gongwen Gan,Chengyong Yu
DOI: https://doi.org/10.1111/jace.17707
IF: 4.186
2021-03-01
Journal of the American Ceramic Society
Abstract:<p>The sintering and microwave dielectric properties of a ceramic material based on the mixing of Mg<sub>3</sub>B<sub>2</sub>O<sub>6</sub> and Zn<sub>3</sub>B<sub>2</sub>O<sub>6</sub> have been widely studied using first principles calculations and experimental solid‐state reactions. Characterization methods include the Network Analyzer, X‐ray, Raman diffraction, scanning electron microscopy, energy‐dispersive spectroscopy, and differential‐thermal & thermo‐mec</p><p>hanical analyzer. The increasing amount of Mg<sup>2+</sup> results in the appearance of Mg<sub>2</sub>B<sub>2</sub>O<sub>5</sub> and ZnO, and the mutual substitution (Mg<sup>2+</sup> and Zn<sup>2+</sup>) phenomenon has emerged in Zn<sub>3</sub>B<sub>2</sub>O<sub>6</sub> and Mg<sub>2</sub>B<sub>2</sub>O<sub>5</sub>. The mechanisms have been explained with the help of DFT calculations. The bond parameters and electron distributions of the ZnO<sub>4</sub> tetrahedron and the MgO<sub>6</sub> octahedron have been modified due to substitution. The sintering, substitution, and phase formation properties have been analyzed quantitatively through the energy parameters. The best dielectric properties were obtained for x=0.20 sintered at 950 ℃, <i>ε<sub>r</sub></i>=6.47, <i>Q</i>×<i>f</i>=89,600 GHz (15.2 GHz), <i>τ<sub>f</sub></i>=‐48.6 ppm/℃, relative density=96.7 %. The mixing of Zn<sub>3</sub>B<sub>2</sub>O<sub>6</sub> and Mg<sub>3</sub>B<sub>2</sub>O<sub>6</sub> ceramics is a feasible method to obtain a ceramic with low sintering temperature and excellent dielectric properties.</p>
materials science, ceramics