Abstract:Constructing stable co-continuous morphology of commercial immiscible polymer blends remains an ongoing challenge in terms of complex presynthetic routes, multiple parameter dependency, and intrinsic instability of phase morphology. Herein, we demonstrate a full biodegradable polymer blend, poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate), where hitherto inaccessible co-continuous with asymmetric compositions (70/30) can be obtained with the assistance of interfacial stereocomplex crystallites (i-SCs) through reactive blending. By taking full advantages of this unprecedented compatibilizer, nanostructured co-continuous blends with synergistically enhanced comprehensive performance are achieved. First, due to the "rigid" i-SC, co-continuous morphology is induced through a simple melt blending procedure; second, considerable augmentation of the crystallization rate of the PLA matrix is accomplished on account of the in situ formed nucleation agent (i.e., i-SC); third, a super toughened material with simultaneously enhanced tensile strength, ductility, and impact strength can be acquired, resulting from the i-SC-induced co-continuous morphology; and fourth, i-SC can function as a "rigid" supporting layer between phases even above 200 °C, resulting in significantly enhanced morphology stability in melt. The versatile, facile, and practical strategy offers an industrially relevant technique to fabricate super-robust and fully biobased polymer materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c02861?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c02861</a>.Molecular formula of reactive compatibilizers: SG, SG-g-PLLA, and SG-g-PDLA, and the corresponding grafted product through reactive blending: SG-g-PLLA-g-PBAT and SG-g-PDLA-g-PBAT; torque values versus time of PBAT/SG (50/6) blends and PLLA/SG (50/6) recorded during melt blending; 1H NMR spectra of SG, PDLA, PBAT, and grafted copolymer after sequential reactive blending and selective extraction of free PLAs and PBAT by acetonitrile and toluene, respectively; stress–strain curves of LSB-blend and DSB-blend specimens; digital picture of the LSB-blend and DSB-blend after impacted measurements; SEM images for impact-fractured surfaces of LSB-blends and DSB-blends; stress–strain curves and notch impact strength of the DSB-blend with the SC located in the PLA matrix and anchoring at the PLA-PBAT interface; mechanical parameters for the pristine blend, LSB-blend, and DSB-blend; and mechanical and thermo parameters for super-toughened PLA/biobased (70/30) polymer blends (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c02861/suppl_file/ma0c02861_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly toughened polylactide with novel sliding graft copolymer by in situ reactive compatibilization, crosslinking and chain extension

Toughening of polylactide with epoxy-functionalized methyl methacrylate–butyl acrylate copolymer

Supertough polylactide materials prepared through in situ reactive blending with PEG-based diacrylate monomer.

Toughening of Polylactide with High Tensile Strength via Constructing an Integrative Physical Crosslinking Network Based on Ionic Interactions

A generalizable strategy toward highly tough and heat-resistant stereocomplex-type polylactide/elastomer blends with substantially enhanced melt processability

Supertoughened Polylactide Via the Addition of Low Content Poly(-caprolactone) and Tensile Deformation above the Glass Transition Temperature

Reactive Micro-Crosslinked Elastomer for Supertoughened Polylactide

Poly(L‐lactide)‐b‐poly(ε‐caprolactone)‐b‐poly(D,L‐lactide) copolymers with enhanced toughness and strength by regulating crystallization and phase separation

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

Toward Highly Toughened Polylactide/Polycaprolactone‐Based Polyurethane Blends With Shape Memory Property via Reactive Blending

Toughening polylactide using epoxy-functionalized core-shell starch nanoparticles

Stable Co-Continuous PLA/PBAT Blends Compatibilized by Interfacial Stereocomplex Crystallites: Toward Full Biodegradable Polymer Blends with Simultaneously Enhanced Mechanical Properties and Crystallization Rates

In-situ self-reinforcement of amorphous polylactide (PLA) through induced crystallites network and its highly ductile and toughened PLA/poly(butylene adipate-co-terephthalate) (PBAT) blends

Balanced Strength and Toughness Improvement in Polylactide (Pla)/poly(1,4-Cyclohexylene Dimethylene Terephthalate Glycol) (PCTG) Blends Using Various Compatibilizers

Highly Toughened and Heat-Resistant Poly(lactic acid) with Balanced Strength Using an Unsaturated Liquid Crystalline Polyester via Dynamic Vulcanization

Highly‐modified Polylactide Transparent Blends with Better Heat‐resistance, Melt Strength, Toughness and Stiffness Balance Due to the Compatibilization and Chain Extender Effects of Methacrylate‐co‐glycidyl Methacrylate Copolymer

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Enhanced the Melt Strength, Toughness and Stiffness Balance of the Reactive PB-g-SAG Core–shell Particles Modified Polylactide Blends with the Aid of a Multifunctional Epoxy-Based Chain Extender

High Performance Polylactide Toughened by Supertough Polyester Thermoplastic Elastomers: Properties and Mechanism

Supertoughened Polylactic Acid/Polybutylene Adipate Terephthalate Blends Compatibilized with Ethylene-Methyl Acrylate-Glycidyl Methacrylate: Morphology and Mechanical Properties by the Response Surface Methodology

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization