Abstract:The article is devoted to the sorption concentration of platinum (II,IV), palladium (II) and rhodium (III) ions from chloride media on a carbon synthetic sorbent. For the study of the sorption concentration of platinum group metals, the carbon synthetic sorbent Lewatit AF5 was chosen. This sorbent has high mechanical strength, high surface area, narrow pore size distribution, and low cost compared to silicate or polymer sorbents. Sorption concentration was carried out under static conditions from model chloride solutions. The concentration of analytes in the initial solutions ranged from 8 to 50 mmol/dm3. Equilibrium concentrations of metals in solutions were determined by inductively coupled plasma atomic emission spectrometry. The dependences of adsorption on contact time, free acidity and redox potential of the system were studied, and the limiting absorption values for each of the metals studied were determined. The study of the kinetic parameters of the sorption of Pt (IV), Pd (II) and Rh (III) ions was carried out from chloride solutions characterized by free acidity values of 0.01 mol/dm3. The time for establishing sorption equilibrium was determined, which was 4 hours for each of the ions. When studying the dependence of adsorption on free acidity and the oxidation-reduction potential of the system (ORP), it was revealed that with an increase in free acidity and redox potential, a decrease in sorption activity is observed, thus we can conclude that aquated complexes of platinum metals, in which metals present not in the highest oxidation state, involved in the sorption process. Processing of experimental data showed the applicability of the linear equation of the Langmuir isotherm for the description of the adsorption process, the limiting adsorption values were calculated, using which the sorption capacity of the sorbent was assessed. The sorption capacity for Pt (II, IV), Pd (II) and Rh (III) was 1.24 mmol/g; 1.16 mmol/g and 0.57 mmol/g, respectively. High values of sorption capacity, as well as a fairly short time to achieve sorption equilibrium without the use of means for the acceleration of the process, in combination with the mechanical characteristics of the sorbent, allow us to conclude that the Lewatit AF5 sorbent is promising for the concentration of platinum group metals from hydrochloric acid solutions.

A Rapid and Selective Isolation of Rhodium from Aqueous Solution Using Nano-Al2o3

Study of sorption of platinum, palladium and rhodium ions on a carbon sorbent

Study on extraction of Rh(III) by DABCO-based ionic liquid from hydrochloric acid medium

Selective Sorption of Noble Metals on Polymer Gel Modified with Ionic Liquid

Crosslinked Polydiallyldimethylammonium Chloride Adsorbent for the Selective Separation of Rhenium Ions from Pregnant Leach Solutions

Selective removal of aluminum ions from rare earth solutions by using ion-imprinted polymers

Impregnated Polymeric Sorbent for the Removal of Noble Metal Ions from Model Chloride Solutions and the RAM Module

Acyl chloride-mediated synthesis of rhodanine-modified UiO-66 for high-efficiency silver recovery

Investigation of selective and effective recovery of noble metal osmium by adsorption onto nano-Al2O3 particles

An alternative way to separating Ir(IV) and Rh(III) ions from a mixed chloride solution with added stannous chloride

Removal of Aluminum from Rare-Earth Leaching Solutions Via a Complexation-Precipitation Process

Effective removal of ruthenium(III) ions from wastewater by xanthate-modified cross-linked chitosan

Adsorption and Desorption Behavior and Mechanism of Ruthenium in Nitrite–Nitric Acid System

Study on Aluminum Removal Through 5-Sulfosalicylic Acid Targeting Complexing and D290 Resin Adsorption

Perchlorate decomposition on rhodium nanoclusters supported on copper crystallite (Rh x Cu) electrode in an electrodialysis-assisted bipolar electro-reduction system (ED-ER)

Feasibility and mechanism of adsorption and bioreduction of hexavalent chromium using Rhodopseudomonas palustris immobilized on multiple materials

Ion-imprinted chitosan without cross-linking agent for efficient selective adsorption of Al(III) from rare earth solution

Removal of Transition Metal Ions from Aqueous Solutions by Adsorption Using a Novel Hybrid Material Silica Gel Chemically Modified by Triethylenetetraminomethylenephosphonic Acid.

Rapid uptake of gold ions by sulfonated humic acid modified phenolic resin with high adsorption capacity and selectivity

Synthesis of Nano‐zero‐valent Iron/Chitosan based on Bimetallic Nanoparticles for the Simultaneous Removal of Reactive Violet 5 and Reactive Blue 171 from Aquatic Media: Response Surface Methodology