Abstract:Nowadays, there is a need for new sources of noble metals due to their dwindling natural resources. This paper presents studies on the sorption of noble metals such as Au(III), Pt(IV), Pd(II) and Rh(III) from model chloride solutions on a newly prepared Amberlite XAD-16–Aliquat 336 sorbent. A "warm impregnation" method without the use of toxic organic solvents was applied to impregnate the polymer matrix. The influence of such factors as hydrochloric acid concentration, sorbent mass and phase contact time was investigated. Kinetic as well as adsorption isotherm studies were carried out. The sorption capacity of the synthesized sorbent was Au(III)—94.34 mg/g, Pt(IV)—45.35 mg/g and Pd(II)—46.03 mg/g. Based on thermodynamic considerations, their sorption proved to be endothermic, as the values of ΔH° > 0. Sorption was spontaneous and favourable (ΔG° < 0). After leaching the RAM module, there was obtained a real solution, in which the metal contents were determined: 38.10 mg/g of gold and 1.76 mg/g of palladium. Totals of 99.9% of gold and 45.4% of palladium were removed from the real leaching solution, with other elements in the solution.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a new type of impregnated polymer adsorbent for removing precious metal ions (such as Au(III), Pt(IV), Pd(II) and Rh(III)) from model chloride solutions and to verify its applicability in actual systems, especially for the recovery of precious metals from discarded random - access memory (RAM) modules. ### Specific problems include: 1. **Develop new adsorbent materials**: Researchers have developed a new type of impregnated resin based on Amberlite XAD - 16 and Aliquat 336 and prepared it using the "warm impregnation method". This method avoids the use of toxic organic solvents and is more environmentally friendly. 2. **Optimize adsorption conditions**: Study the factors affecting the adsorption effect, such as hydrochloric acid concentration, adsorbent dosage and contact time, etc., in order to find the optimal adsorption conditions. 3. **Evaluate adsorption performance**: Evaluate the adsorption performance of the new adsorbent for precious metal ions through kinetic, adsorption isotherm and thermodynamic studies. The experimental results show that the maximum adsorption capacities of the synthesized adsorbent for Au(III), Pt(IV) and Pd(II) are 94.34 mg/g, 45.35 mg/g and 46.03 mg/g respectively. 4. **Verify practical application**: Verify the effectiveness of this adsorbent in practical application scenarios by treating discarded RAM modules. The experimental results show that 99.9% of gold and 45.4% of palladium can be removed from the actual leachate respectively. ### Research background: With the progress of technology, the demand for precious metals is constantly increasing, while natural resources are gradually being depleted. Therefore, the recovery of precious metals from waste electrical and electronic equipment (WEEE) has become particularly important. Traditional metallurgical methods (such as pyrometallurgy and hydrometallurgy) have problems such as high energy consumption and environmental pollution. This study aims to provide an efficient and environmentally - friendly method for the recovery of precious metals to address the problem of resource shortage. ### Conclusion: This study has successfully developed a new type of impregnated polymer adsorbent, which can effectively remove precious metal ions in model chloride solutions under laboratory conditions and also shows good recovery effects in practical applications. This achievement provides new ideas and technical support for the sustainable recovery of precious metals.

Impregnated Polymeric Sorbent for the Removal of Noble Metal Ions from Model Chloride Solutions and the RAM Module

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Minor Actinides Partitioning: Uptake of Palladium with Triazine-Containing Adsorbent under the Framework of Spmp Process

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Study of sorption of platinum, palladium and rhodium ions on a carbon sorbent

Adsorption characteristics of noble metals on the strongly basic anion exchanger Purolite A-400TL

Selective Sorption of Noble Metals on Polymer Gel Modified with Ionic Liquid

Synthesised phosphine sulphide-type macroporous polymers for the preconcentration and separation of gold (III) and palladium (II) in a column system

Evaluation of a triethylenetetramine-chitosan derivative for the removal of palladium ion from an intricate adsorbate system

Novel Polyazamacrocyclic Receptor Impregnated Macroporous Polymeric Resins for Highly Efficient Capture of Palladium from Nitric Acid Media

The Adsorption of Gold, Palladium, and Platinum from Acidic Chloride Solutions on Mesoporous Carbons

Evaluation of Performance of Functionalized Amberlite XAD7 with Dibenzo-18-Crown Ether-6 for Palladium Recovery

Selectivity of modified pomegranate peel for gold, platinum, and palladium: Adsorption behavior, mechanism, and recovery

Novel cationic porous materials with open architectures for highly efficient palladium recovery: Integrated experimental studies and DFT simulations

Styrene divinyl benzene beads (SM-2) functionalized with triisobutylphosphine sulfide for selective uptake of palladium(II) from nitric acid medium

Preparation of a mesoporous ion-exchange resin for efficient separation of palladium from simulated electroplating wastewater

Adsorption of Ruthenium, Rhodium and Palladium from Simulated High-Level Liquid Waste by Highly Functional Xerogel - 13286

Removal of Transition Metal Ions from Aqueous Solutions by Adsorption Using a Novel Hybrid Material Silica Gel Chemically Modified by Triethylenetetraminomethylenephosphonic Acid.

The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions