Abstract:An amine-based functionalized mesoporous silica (SBA-15-TEPA) adsorbent constructed from mesoporous silica was produced to realize efficient and highly selective recovery of palladium from wastewater. SEM-EDS, TEM, TG-DSC, and N 2 adsorption-desorption isotherm were used to evaluate the as-prepared SBA-15-TEPA, and the results demonstrate that the material has a good open pore structure, a high loading rate, and a sizable specific surface area. The performance analysis demonstrates that SBA-15-TEPA exhibits excellent selectivity (Separation factor of palladium for impurity ions >5565) in a broad range of acidity and good repeatability (≥5) toward palladium, good repeatability is important for clean adsorption, with a maximal capacity of 94.92 mg Pd/g at pH = 1.5 at 315 K. 0.1 M thiourea - 0.1 M HNO 3 was capable of desorbing the adsorbed Pd(II) almost entirely. The mechanism of adsorption and desorption was investigated by FT-IR, XPS and DFT calculation, which proves that the coordination structure occurs mainly between N in the adsorbent and Pd(II) with NO 3 − participation for change balance, i.e., the strong chemical complexation between the electron pair acceptor Pd(II) and the electron pair donor N. The dynamic separation of Pd(II) by SBA-15-TEPA from simulated electroplating wastes was evaluated by column experiment, and nearly 100% recovery of Pd(II) was obtained with demonstrating outstanding enrichment coefficients (>104). SBA-15-TEPA met the requirements of dynamic adsorption experiments and successfully achieved the complete separation and high enrichment of palladium from waste liquids in high throughput. This result fills the gap where functionalized silicon-based materials could not be separated and enriched for palladium in column experiments and will also provide new ways to address palladium scarcity, environmental protection and ensure cleaner production.

Preparation of a mesoporous ion-exchange resin for efficient separation of palladium from simulated electroplating wastewater

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Development of Two novel silica based symmetric triazine-ring opening N-donor ligands functional adsorbents for highly efficient separation of palladium from HNO3 solution.

Preparation of A Macroporous Silica-Based Multidentate Soft-Ligand Material and Its Application in the Adsorption of Palladium and the Others

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Minor Actinides Partitioning: Uptake of Palladium with Triazine-Containing Adsorbent under the Framework of Spmp Process

Synthesis of a Macroporous Silica‐based Derivative of Pyridine Material and Its Application in Separation of Palladium

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Preparation of a Macroporous Silica–pyridine Multidentate Material and Its Adsorption Behavior for Some Typical Elements

Preparation of A Macroporous Silica-Based Pyridine Impregnated Material and Its Adsorption for Palladium

Precise separation and efficient enrichment of palladium from wastewater by amino-functionalized silica adsorbent

Highly Selective Recovery of Palladium by A New Silica-Based Adsorbent Functionalized with Macrocyclic Ligand

Highly Selective Adsorption and Recovery of Palladium from Spent Catalyst Wastewater by 1,4,7,10-Tetraazacyclododecane-Modified Mesoporous Silica

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Silica-supported thiourea resin for efficient recovery of Pd(II): Batch, column and mechanism study

Efficient separation of palladium from nitric acid solution by a novel silica-based ion exchanger with ultrahigh adsorption selectivity

Synthesis of Carbon Disulfide Modified Chitosan Resin and Its Adsorption Properties for Palladium(ⅱ) in Wastewater

Covalent Organic Framework with Predesigned Single-Ion Traps for Highly Efficient Palladium Recovery from Wastes

Silica-based covalent organic framework composite for efficient separation and enrichment of palladium and its heterogeneous catalysis application

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide

Selective capture of palladium from acid wastewater by thiazole-modified activated carbon: Performance and mechanism