Abstract:Palladium (Pd), a well-known noble metal for its exceptional physical and chemical properties, finds widespread applications in sectors including automotive, hydrogen purification, dentistry, coinage, and jewelry. The growing demand for Pd has led to resource scarcity. This feature necessitated upon the economically and environmentally viable means for the reclamation of the precious metal ions from secondary sources. This article delves into the Pd adsorptive-desorption trends associated with the triethylenetetramine cross-linked chitosan (CH-TETA) derivative in moderately complex solutions. The effect of moderate solution chemistry complexity, incorporating ammonium hydroxide (NH 4 OH) and ethylenediaminetetraacetic acid (EDTA), within the synthetic electroless plating (ELP) solutions was investigated. Batch adsorption experiments were conducted through a variation of process parameters namely solution pH, CH-TETA dosage, adsorption duration, initial Pd concentration, and temperature. CH-TETA demonstrates an impressive Pd adsorption capacity ranging from 43.53 to 117.08 mg g−1 and is correspondingly accompanied by the metal removal efficiency range of 87.05% to 39.03%. Such promising performance has been ascertained for an initial Pd constitution of 50 to 300 mgL−1. Despite constituting other additives in the adsorbate system, utilizing simple acidic and basic eluents, the CH-TETA derivative exhibited a reasonable recovery efficacy of 39.68%. Thereafter, recovery of Pd can be further enhanced into two approaches. In these, the first refers to the utilization of various other methods such as thermal, electrochemical, ultrasound, and microwave-assisted regeneration from spent adsorbents. Secondly, a pre-treatment method can be adopted to remove the additives prior to the adsorption process. In summary, the recovery of precious metal ions from the spent adsorbents has been a challenging task. Based on the discussion, further improvements based on the findings of this article are possible by targeting relevant research methodologies in resin chemistry and regeneration methods.

Styrene divinyl benzene beads (SM-2) functionalized with triisobutylphosphine sulfide for selective uptake of palladium(II) from nitric acid medium

Minor Actinides Partitioning: Uptake of Palladium with Triazine-Containing Adsorbent under the Framework of Spmp Process

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Preparation of A Macroporous Silica-Based Pyridine Impregnated Material and Its Adsorption for Palladium

Preparation of A Macroporous Silica-Based Multidentate Soft-Ligand Material and Its Application in the Adsorption of Palladium and the Others

Preparation of a Macroporous Silica–pyridine Multidentate Material and Its Adsorption Behavior for Some Typical Elements

Synthesis of a Macroporous Silica‐based Derivative of Pyridine Material and Its Application in Separation of Palladium

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Preparation and Characterization of a Mesoporous Polycrown Impregnated Silica and Its Adsorption for Palladium from Highly Acid Medium

Development of Two novel silica based symmetric triazine-ring opening N-donor ligands functional adsorbents for highly efficient separation of palladium from HNO3 solution.

Adsorption of Some Typical Fission Products onto a Novel Macroporous Silica-based Dialkyl Derivative of Pyridine Impregnated Material

Silica-supported thiourea resin for efficient recovery of Pd(II): Batch, column and mechanism study

Efficient separation of palladium from high-level liquid waste with novel adsorbents prepared by sulfhydryl organic ligands containing imidazole, thiazole and oxazole composited with XAD7HP

Recovery of Palladium by Silica/polymer-Based 2,6-Bis(5,6,7,8-tetrahydro-5,8,9,9-tetramethyl-5,8-methano-1,2,4-benzotriazin-3-yl)pyridine Adsorbents from High Level Liquid Waste

Evaluation of a triethylenetetramine-chitosan derivative for the removal of palladium ion from an intricate adsorbate system

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.

Solid Phase Extraction of Palladium Uusing Microspheres Containing Hexyl Benzimidazolyl Sulphide As Sorbent

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide

Synthesised phosphine sulphide-type macroporous polymers for the preconcentration and separation of gold (III) and palladium (II) in a column system