Abstract:With the increase in computational costs driven by the use of artificial intelligence, enhancing the performance of semiconductor systems while improving efficiency has become an inevitable challenge. Due to the fine pitch limits of micro bumps, bumpless Cu-Cu bonding is emerging as the next-generation core technology. This study aims to analyze the effects of individual temperature and pressure on both large- and local-scale behaviors of material in the Cu-Cu bonding process with experiments and numerical analysis. The motivation of this study is to compensate the deficiencies in reported studies on process optimization, particularly the lack of exploration of the separated effects of temperature and pressure on large- and local-scale Cu-Cu bonding. Furthermore, reports on the thermodynamic modeling of Cu-Cu bonding behavior are not sufficient, making it challenging to find suitable models. Bonding experiments were performed by independently controlling the temperature and pressure using blank Cu films treated by precise chemical mechanical polishing (CMP) processes. The large-scale bonded area under each condition was measured, and transmission electron microscope (TEM) images were captured to observe the patterns of local void formation under various temperature and pressure conditions. In the experiments, it was observed that the temperature increase had a greater impact on the bonded area at a larger scale than the increase in pressure. However, for nanoscale-local voids, an increase in pressure had a more dominant effect. To discuss the experimental results, a thermodynamic modeling framework that considers coupled heat-induced deformation, plastic deformation, and volumetric changes caused by material flux was proposed. The proposed model has been implemented in the user-defined material subroutine (UMAT) of the ABAQUS program for finite element (FE) analysis. Numerical analysis using the proposed model captures the experimental data well. In large-scale simulations, temperature conditions have a significant impact, with plastic deformation being the primary mode of deformation, while the pressure conditions dominate the material flux, making substantial contributions to reducing voids at local-scale. To achieve complete closure of the void, the simulation demonstrated that maintaining a sufficient pressure gradient until the complete closure is required. The study findings provide an explicit understanding of how the temperature and pressure conditions differently affect large-scale bonding and local voids for semiconductor package manufacturing.

Development of A Tight-Binding Model for Cu and Its Application to A Cu-Heat-Sink under Irradiation

Structural Features and Thermal Properties of W/Cu Compounds Using Tight-Binding Potential Calculations

A Crystal Plasticity Model with Irradiation Effect for the Mechanical Behavior of FCC Metals

OKMC Simulation of Vacancy-Enhanced Cu Solute Segregation Affected by Temperature/irradiation in the Fe–Cu System

The Thermal Conductivity of Defected Copper at Finite Temperatures

Atomic Irradiation Defects Induced Hardening Model in Irradiated Tungsten Based on Molecular Dynamics and CPFEM

A Self-Consistent Plasticity Theory for Modeling the Thermo-Mechanical Properties of Irradiated Fcc Metallic Polycrystals

Atomic cluster expansion interatomic potential for defects and thermodynamics of Cu-W system

Atomistically-informed Hardening and Kinetics Models of Helium Bubble in Irradiated Tungsten

Mechanical Properties of Self-Irradiated Single-Crystal Copper

Experiments And/or Crystal Plasticity Finite Element Modeling of the Mechanical Properties of Pristine and Irradiated Tungsten Single Crystal

An empirical law for the elastic moduli of component-segregated W/Cu compounds

Thermodynamic modeling framework with experimental investigation of the large-scale bonded area and local void in Cu-Cu bonding interface for advanced semiconductor packaging

Void-shape dependent hardening model in irradiated face-centered-cubic metals

Detection of a Thick Disk in the edge-on Low Surface Brightness Galaxy ESO 342-G017: I. VLT Photometry in V and R Bands

Computational Simulation of He Bubble Evolution in Fcc Cu with Σ3 Twin Boundary Using Object Kinetic Monte Carlo Method

Atomistic simulations of athermal irradiation creep and swelling of copper and tungsten in the high dose limit

The nucleation and growth mechanism of solid-state amorphization and diffusion behavior at the W-Cu interface

Formation and stability of the early stage solute and defect clusters in Cu-free ferritic steels during irradiation

Ab Initio Calculation of Impurity Effects in Copper Oxide Materials

Computer simulation of displacement cascades in tungsten with modified F-S type potential