Abstract:Digital light processing (DLP)-based 3D printing technique holds promise in fabricating scaffolds with high precision. Here raw calcium phosphate (CaP) powders were modified by 5.5% monoalcohol ethoxylate phosphate (MAEP) to ensure high solid loading and low viscosity. The rheological tests found that photocurable slurries composed of 50 wt% modified CaP powders and 2 wt% toners were suitable for DLP printing. Based on geometric models designed by computer-aided design (CAD) system, three printed CaP ceramics with distinct macroporous structures were prepared, including simple cube, octet-truss and inverse face-centered cube (fcc), which presented the similar phase composition and microstructure, but the different macropore geometries. Inverse fcc group showed the highest porosity and compressive strength. The in vitro and in vivo biological evaluations were performed to compare the bioactivity of three printed CaP ceramics, and the traditional foamed ceramic was used as control. It suggested that all CaP ceramics exhibited good biocompatibility, as evidence by an even bone-like apatite layer formation on the surface, and the good cell proliferation and spreading. A mouse intramuscular implantation model found that all of CaP ceramics could induce ectopic bone formation, and foam group had the strongest osteoinduction, followed by inverse fcc, while cube and octet-truss had the weakest one. It indicated that macropore geometry was of great importance to affect the osteoinductivity of scaffolds, and spherical, concave macropores facilitated osteogenesis. These findings provide a strategy to design and fabricate high-performance orthopedic grafts with proper pore geometry and desired biological performance via DLP-based 3D printing technique.

Fabrication of Mesoporous Calcium Silicate/calcium Phosphate Cement Scaffolds with High Mechanical Strength by Freeform Fabrication System with Micro-Droplet Jetting

3D-Printed Bioceramic Scaffolds with High Strength and High Precision

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

The Effect of Calcium Sulfate Incorporation on Physiochemical and Biological Properties of 3D-Printed Mesoporous Calcium Silicate Cement Scaffolds

Fabrication and Biological Evaluation of 3D-Printed Calcium Phosphate Ceramic Scaffolds with Distinct Macroporous Geometries Through Digital Light Processing Technology.

Fabrication and in Vitro Evaluation of Calcium Phosphate Combined with Chitosan Fibers for Scaffold Structures

Fabrication and Mechanical Properties of PLLA and CPC Composite Scaffolds

Fabrication of Bioceramic Scaffolds with Pre-Designed Internal Architecture by Gel Casting and Indirect Stereolithography Techniques

Calcium silicate cements endowing bioactivity and sustaining mechanical strength of low-heat-releasing and fast-curing magnesium phosphate cements

Mesoporous calcium silicate and titanium composite scaffolds via 3D-printing for improved properties in bone repair

Fabrication and in vitro evaluation of a novel calcium silicate scaffold with controlled architecture by rapid prototyping

Characterization and Osteogenic Evaluation of Mesoporous Magnesium–calcium Silicate/polycaprolactone/polybutylene Succinate Composite Scaffolds Fabricated by Rapid Prototyping

Design and Fabrication of Cap Scaffolds by Indirect Solid Free Form Fabrication

Biocompatibility and Osteogenesis of Calcium Phosphate Cement Scaffolds for Bone Tissue Engineering

Preparation of 3D printed calcium sulfate filled PLA scaffolds with improved mechanical and degradation properties

Fabrication of 3D printed Ca3Mg3(PO4)4-based bioceramic scaffolds with tailorable high mechanical strength and osteostimulation effect

In Vitro Bioactivity and Degradability of Β-Tricalcium Phosphate Porous Scaffold Fabricated Via Selective Laser Sintering.

Fabrication and Performance of Calcium Phosphate Cement/small Intestinal Submucosa Composite Bionic Bone Scaffolds with Different Microstructures

Fabrication and characterization of toughness-enhanced scaffolds comprising β-TCP/POC using the freeform fabrication system with micro-droplet jetting

Bioactive calcium sulfate/magnesium phosphate cement for bone substitute applications