Abstract:(SiC+TiB 2 )/AlSi10Mg composite powders with 5 wt% micro-SiC particles and 1.5 wt% nano-TiB 2 particles were prepared by high energy ball milling, and hybrid particle reinforced aluminum matrix composites (AMCs) were fabricated by SLM. This study systematically investigated the effects of SiC and TiB 2 particles on the phase composition, microstructure evolution, grain crystallization, and mechanical properties. The machanisms of potential strengthening and fracture mechanisms were revealed. The tribological behaviors of the hybrid particle reinforced AlSi10Mg composites under different friction conditions were explored as well. The results show that the 1.5 wt% nano-TiB 2 particles provided sufficient nucleation sites for grain growth, completely transforming from coarse columnar to fined equiaxed grains. The average grain size decreases from 7.98 μm to 3.34 μm, and the texture is significantly weakened, which is beneficial to the homogenization of the microstructure, thereby improving the mechanical properties of the SiC/AlSi10Mg composites. The (SiC+TiB 2 )/AlSi10Mg composites showed a high ultimate tensile strength (∼ 489.1 MP), hardness (172.2 HV) and elongation of 8.2 %. The enhancement of mechanical properties was attributed to Orowan strengthening, fine grain strengthening, and load-bearing strengthening. Due to the Si precipitates and fine microstructure, a low wear rate of 0.50 × 10 −5 g/m was obtained, 10.7 % lower than that of SLM formed SiC/AlSi10Mg composites. The friction process is affected by abrasive wear, adhesive wear and delamination wear. It is aspired that the current approach can provide guidance for the design of new alloy systems with excellent performance.

Microstructure and Properties of in Situ Si and Fe-rich Particles Reinforced Al Matrix Composites Assisted with Ultrasonic Vibration

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Reinforcement of Hypereutectic Al-Si Alloys with Fe-Bearing Compounds and Si Particles Assisted with Ultrasonic Treatment

Effect of Ultrasonic Vibration on Fe-containing Intermetallic Compounds of Hypereutectic Al–Si Alloys with High Fe Content

Microstructure and Mechanical Properties of In-Situ Α-Al2o3p/al-12si Composites Fabricated by Direct Melt Reaction Method with Aid of Electromagnetic Stirring

Preparation and Mechanical Properties of in Situ Submicron MgAl2O4p/6061Al Composites from Al–Mg–SiO2 System

Fabrication, Microstructure Refinement and Strengthening Mechanisms of Nanosized SiCP/Al Composites Assisted Ultrasonic Vibration

Effects of Ultrasonic Vibration on Morphology of Iron-Containing Intermetallic Compounds in Al-17Si-xFe Alloys

Microstructural Evolution of Reinforcements in the Remelting in Situ TiC/Al–12Si Composites Treated by Ultrasonic Vibration

Microstructure and Mechanical Properties of Rheo-Diecast Hypereutectic Al–Si Alloy with 2%fe Assisted with Ultrasonic Vibration Process

Microstructure and mechanical properties of in-situ Al 13Fe 4/Al composites prepared by mechanical alloying and spark plasma sintering

Variation of Microstructure and Mechanical Properties of Hybrid Particulates Reinforced Al-alloy Matrix Composites with Ultrasonic Treatment

Effects of Ultrasonic Vibration on Microstructure and Mechanical Properties of Nano-Sized SiC Particles Reinforced Al-5Cu Composites.

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

Effect of Ultrasonic Stirring on the Microstructure and Mechanical Properties of in Situ Mg2Si/Al Composite

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Wear Properties of Al-17Si Alloys with Variable Fe Levels Formed by Semi-Solid Process

Fabrication and Microstructure of in Situ Toughened Al2o3/Fe3al

Microstructure and Properties of High Silicon Aluminum Alloy with 2% Fe Prepared by Rheo-Casting

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites