Abstract:The main objective of this work was to evaluate the effect of processing and material parameters on the reinforcement mat permeability through mould-filling experiments and to model the reinforcement mat permeability as a function of porosity, mat layers, test-fluid viscosity and injection pressure using machine learning (ML) techniques. Two experimental methods based on electrical sensors and visualization techniques were employed to measure the permeability through temporal flow front tracking. The fibre wetting analysis was performed using contact angle measurements to analyse the test fluid saturation at the reinforcement mats and its effect on mat permeability. Artificial neural network (ANN) and the adaptive neuro-fuzzy inference system (ANFIS) ML models were adopted to model effective permeability as a function of four input parameters using the experimental data. From the results, the order of permeability was obtained between 8 × 10 –10 to 8 × 10 –9 m 2 for chopped strand glass-fibre mat, 8.8 × 10 –10 to 8 × 10 –9 m 2 for jute fibre mat, 8.9 × 10 –10 to 8.5 × 10 –9 m 2 for woven roving glass-fibre mat, and 8.9 × 10 –10 to 1 × 10 –8 m 2 for hemp fibre mat. From the fibre wetting analysis, it was found that the mat permeability decreases with the increase in the test fluid–fibre surface wetting time. From the modelling analysis, it was found that the adopted ANN and ANFIS techniques predicted permeability values qualitatively and quantitatively with R 2 values of 0.967 and 0.975, respectively. From the statistical analysis, ANFIS has shown an efficient correlation with the experimental permeability as a function of input key parameters than the ANN approach. Graphical

Effect of Nesting on the Out-Of-Plane Permeability of Unidirectional Fabrics in Resin Transfer Molding

Permeability Prediction in Nonwoven Geotextiles Using Mathematical Modeling and Numerical Simulation

EFFECT OF LAYERS ON PERMEABILITY

PREDICTION OF THE VERTICAL PERMEABILITY COEFFICIENT BASED ON FRACTAL THEORY FOR WOVEN SLIT-FILM GEOTEXTILES

Numerical prediction of effect of filling flow on short fiber orientation in injection molding

Woven Geotextile Permeability under Uniaxial and Laterally Constrained Conditions

Effect of Stitches on the Permeability of Interbundle Channels in Stitched Fabrics

Study on Void Formation in Multi-Layer Woven Fabrics

Numerical prediction strategy of fabric in‐plane permeability considering realistic inter‐ and intra‐tow geometry

Numerical Simulation of Edge Effect in Resin Transfer Molding for Plain-weave Fabric

Investigation of Automated Geometry Modeling Process of Woven Fabrics Based on the Yarn Structures

Permeability Prediction of Fabric Preform Using Homogenization Method

Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process

MECHANISM OF VOID FORMATION IN TEXTILE PREFORM-MULTI-LAYER WOVEN FABRICS

Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Model Prediction and Experimental Validation of Transverse Permeability of Large-Tow Carbon Fiber Composites

Permeability of Hybrid Reinforcements and Mechanical Properties of their Composites Molded by Resin Transfer Molding

Effect of Process and Material Parameters on the Permeabilities of Reinforcement Mats: Experimentations and Machine Learning Techniques

Numerical Model of Jet Formation During Melt Electrowriting for Fabrication of Precise Structures

Unsaturated out-of-plane permeability measured with three-dimensional flow monitoring by etched optical fiber sensors