Abstract:Short-carbon-fiber-reinforced polyetherimide (SCF/PEI) composites have good mechanical properties and are expected to have wide applications including components serving under water lubrication conditions. However, no work has been reported on the tribological behaviors of SCF/PEI composites under water lubrication conditions. This work attempts to explore the practicality of the SCF/PEI composite from a tribological point of view under water lubrication conditions. SCFs are coated by polydopamine (PDA) to enhance the interfacial interaction between fibers and matrix. The tribological performances of SCF/PEI composite are systematically investigated by sliding wear tests under tap and sea water lubrication conditions. Experimental results show that the SCF/PEI composite has a better friction performance in water lubrications than that under dry sliding because of the separation effects formed by a water molecule film and a transfer film. However, no remarkable differences of wear resistance are found between water lubrication and dry contact conditions, and the magnitude of specific wear rate under these conditions is around 1×10-6 mm3/N·m. It is found that contact surface hardness of the SCF/PEI composite is reduced after a sliding test in water due to the plasticization phenomenon, especially sea water can accelerate the diffusion of water molecules into matrix, making the specific wear rate in sea water is ten times of that in tap water for highly-loaded conditions. Meanwhile, the abrasive wear is observed to be the dominated wear mode in boundary lubrication regime, and the adhesion wear occurs around the transition position from the boundary to mixed lubrication regime. It is also found that pressure has a significant effect on the temperature rise within the contact surface than the speed does. Finally, the tribological performance of the SCF/PEI composite under water is exhibited to be better than that of most of polymers and composites reported previously.

Fiber Hybrid Polyimide‐based Composites Reinforced with Carbon Fiber and Poly‐p‐phenylene Benzobisthiazole Fiber: Tribological Behaviors under Sea Water Lubrication

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological properties of perfluoropolymer fiber filled carbon fiber/polyphenylene sulfide composites: Effect of in‐situ fibrillated fiber or split fiber

Tribological behavior of short carbon fiber reinforced polyetherimide composite under water lubrication conditions

Tribological behaviors of polyimide composite coatings containing carbon nanotubes and fluorinated graphene with hybrid phase or blend phase

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets

Mussel-inspired Polydopamine Functionalized PBO Fibers As an Efficient Additive for UHMWPE Composites with Improved Tribological Performance

Branched Fluorine/Adamantane Interfacial Compatibilizer for PBO Fibers/Cyanate Ester Wave-Transparent Laminated Composites

Comparative Investigation on the Friction and Wear Behaviors of Carbon Fabric–Reinforced Phenolic Composites under Seawater Lubrication

Tribological properties of PTFE fiber filled polyoxymethylene composites: The influence of fiber orientation

Enhanced high‐temperature tribological performance of PTFE / PI fabric composites by simultaneously introducing PDA / SiO 2 hybrid coating and aramid product reinforcements

Growth of ultra-dense MoS2 nanosheets on carbon fibers to improve the mechanical and tribological properties of polyimide composites

Tribological Characteristics of Fibrous Polyphthalamide-Based Composites

Hybridization of Polytetrafluorethylene Fibers and Multiscale Short Carbon Fibers to Significantly Improve the Tribological Performance of Polyphenylene Sulfide

Tribological Properties of Polyimide Composites Modified with Diamondoid Metal–Organic Frameworks

Polyimide-based composite coatings for simultaneously enhanced mechanical and tribological properties by polyhedral oligomeric silsesquioxane

Enhancing interfacial adhesion and mechanical performance of PBO fibers composites through mussel‐inspired molecular regulation of interphase structure

Combined effects of interface modification and micro-filler reinforcements on the thermal and tribological performances of fabric composites

Study on the Tribological Properties of Carbon Fabric/Polyimide Composites Filled with SiC Nanoparticles

A new polyimide matrix composite to improve friction-induced chatter performance through reducing fluctuation in friction force

Indomethacin suppositories versus intravenously titrated morphine for the treatment of ureteral colic.