Abstract:Micro-CT technique poses significant applications in characterizing the microstructure of materials. Based on the CT three-dimensional(3D) reconstruction technology and “Avizo” 3D visualization software, the microscopic pore-throat structure of porous media can be quantitatively characterized. This paper takes the carbon fiber reinforced resin matrix composites as an example to introduce the operation process of “Avizo” in details, which mainly covers the following modules: Volume Edit, Interactive Thresholding, Fill Holes, Mask, Separate Objects and Generate Pore Network Model, then further discuss the difficult problems when the “Avizo” is employed to analyze. The microstructures of carbon fiber reinforced resin matrix composites illustrate that pores in the upper part of sample are dramatically dispersed, and mainly concentrated in the lower part of sample. The porosity of adopted cuboid is 3.6%, accordingly the numbers of pores and throats reach 268 and 7, respectively. The equivalent radius of pores seems mainly distributed in the range of 0.7–0.8μm, accounting for 28.73% of the total pore number. The surface area of pore ranges from 5 to 10μm 2 , accounting for 14.16% of the total pore number. The pore volume concentrates in the range of 1–20μm 3 , accounting for 57.46% of the total pore number. In addition, the equivalent radius of throat mainly concentrates in the range of 1–5μm, the overall length of throat is distributed in the range of 37–60μm, and the equivalent area of throat is distributed non-uniformly in the range of 5–75μm 2 . This work provides a basis for the further investigation of fluid migration mechanism and law in the composite materials by the numerical simulation methodology.

Nano-CT Characterization of the Microstructure in the Nonwoven Polishing Wheel

Investigations on Grinding Process of Woven Ceramic Matrix Composite Based on Reinforced Fiber Orientations

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

Some observations in grinding surface quality of FRCMC

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Nonwoven Wheel Polishing Of Ti-6al-4v And Co-Cr-Mo Alloys

Nano-CT Study on Nanostructure of Porous Ceramics

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Superfinishing Technology Test for Ceramic Cylindrical Rollers

Micro-CT Characterization on the Meso-Structure of Three-Dimensional Full Five-Directional Braided Composite

Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel

Porous Structure Design and Fabrication of Metal-Bonded Diamond Grinding Wheel Based on Selective Laser Melting (SLM)

Micro/nano-wear Studies on Epoxy/silica Nanocomposites

Study on the Reinforcing Effect of Nano-Sio2 Filled PTFE Composites

On the microstructure evolution and nanocrystalline formation of pearlitic wheel material in a rolling-sliding contact

Pore-throat structure characterization of carbon fiber reinforced resin matrix composites: Employing Micro-CT and Avizo technique

Preparation and Property of Carbon-Nanotubes/pet

Pore morphology design and grinding performance evaluation of porous grinding wheel made by additive manufacturing

Preparation of Micro-Pit-Textured PCD Tools and Micro-Turning Experiment on SiCp/Al Composites

Microstructure characteristics of nonwoven geotextiles using SEM and CT methods