Abstract:Probe is a key part of atomic force microscopy (AFM) and the curvature radius of its tip limits the lateral resolution. Furthermore, as an expendable, its life has a direct effect on operation cost. Single-walled carbon nanotubes (SWNTs) are ideal materials for the probe tips used in atomic force microscopy (AFM), since they have intrinsically small diameters, high aspect ratios and unique wearability. Herein, the fabrication of AFM SWNT tips is systemically investigated, including mechanical method and direct growth method. In the former, substrates with isolated SWNTs are first prepared by chemical vapor deposition and then scanned with conventional silicon probes under AFM. During scanning, SWNTs can be picked up from substrates and attached to the pyramid of silicon probes via attractive Van del Waals forces. Preparation of substrates is decisive to this method, since only the SWNTs disengaged from surface are possible to pick up. Different substrates have been compared and the results show that the substrates full of gaps are prior to the planar ones. SWNTs are suspended across gaps and suitable to the following assembly. The mechanical method is easily implemented and can produce AFM SWNT tips one by one, while the direct growth method is promising to manufacture them in a large scale, in spite of more difficulty. In the latter, catalyst for the growth of SWNTs is directly placed on individual commercial probes or pyramid arrays. Through chemical vapor deposition, grown SWNTs protrude from the original tips and create new ones. Due to the random orientation of SWNT growth, the yield of successful SWNT tips is generally low for the direct growth method. In this article, Electric filed is used to direct the growth orientation of SWNTs during chemical vapor deposition. Both electrodes are located in the furnace to apply a static electric field along the pyramid axis during growth. The intensity can be varied from 0.1V/um to IV/um, and the direction is towards the surface of wafers. The growth of SWNTs is oriented by electric field and the yield of SWNT tips is raised. The AFM SWNT tips derived from the above two methods have been utilized to image Au layers in the tapping mode. Compared with conventional silicon probes, SWNT tips are longer lasting to keep a high resolution.

Fabrication of Long and Smooth Tungsten Probes for Nano-manipulation

The Art of Electrochemical Etching for Preparing Tungsten Probes with Controllable Tip Profile and Characteristic Parameters

Systematic Study of Electropolishing Technique for Improving the Quality and Production Reproducibility of Tungsten STM Probe

A reproducible electropolishing technique to customize tungsten SPM probe: From mathematical modeling to realization

Electrochemical Preparation of STM Probes for High Aspect Ratio Nanometrology

Fabrication of Tungsten nanoprobes by Electrochemical etching: Role of cathode geometry and their use as electrical probe

Transport-limited electrochemical formation of long nanosharp probes from tungsten

Fabrication of the Tip of GaAs Microwave Probe by Wet Etching

Manufacturing of A micro probe using supersonic aided electrolysis process

Optimization Of The Tip Of Microwave Afm Probe

Rapid Fabrication of High-Aspect-Ratio Platinum Microprobes by Electrochemical Discharge Etching

Electrochemical micro-machining of high aspect ratio micro-tools with a reverse conical shape tip using electrolyte liquid membrane

Fabrication of AFM Single-Walled Carbon Nanotube Tips

Fabrication of Large Cone Angle Optical Fiber Probe by Dynamic Chemical Etching Method

Preparation Of Cantilevered W Tips For Atomic Force Microscopy And Apertureless Near-Field Scanning Optical Microscopy

Fabrication of high-aspect-ratio platinum probes by two-step electrochemical etching

Fabrication of Tungsten Tip for Scanning Tunneling Microscope by the Lever Principle

Systematic electrochemical etching of various metal tips for tunneling spectroscopy and scanning probe microscopy

Fabrication of AFM Probe with CuO Nanowire Formed by Stress-Induced Method

Fabrication of oscillating metal probe for dynamic scanning microwave microscopy

Fabrication of High‐quality SNOM Probes by Pre‐treating the Fibres Before Chemical Etching