Abstract:In this paper, we shall present a new micromechanical damage model for capturing the mechanical behaviors of quasi-brittle geomaterials under a wide range of compressive stress. Two essential coupled non-linear mechanisms are taken into account: plastic deformation related to frictional sliding along the microcrack surfaces, and microscopic damage induced by the initiation and propagation of microcracks. Within the framework of thermodynamics and Mori–Tanaka homogenization scheme, free energy and thermodynamic forces, including the local stress applied on the microcracks and damage driving force are deduced. The main novelty of this work lies in presenting a new physically based non-associated and state-dependent friction law to capture the plastic distortion, in which the friction coefficient is no longer a constant but a state-dependent variable varying with the surface asperities of microcracks. The relationship between the friction coefficient and mean local stress, as well as microscopic damage is subtly defined. Intriguingly, a macroscopic strength criterion is derived as an inherent part of the proposed model without rotation of the principal stress. Moreover, semi-analytical stress–strain–damage relationships of the proposed model can be derived under conventional triaxial compression. These up-scaling analyses provide a powerful tool for parameter calibration. For application, the semi-implicit return mapping algorithm with plasticity-damage decoupling correction procedure (SRM-PDDC) is adopted for numerical implementation. To demonstrate the performance of the micromechanical model, we compare the model predictions with experimental data of quasi-brittle rocks in literature as well as the results obtained by Zhu et al. (2016). Finally, the applicable condition of the SRM-PDDC algorithm is discussed in detail.

Antiplane Shear Fields Near a Crack-Tip in a Brittle Damaged Material

Dynamic Fracture in Brittle Solids at High Rates of Loading

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

A New Damage Model for Microcrack-Weakened Brittle Solids

Analyses of Damage Localization at Crack Tip in a Brittle Damaged Material

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Quasi-micromechanical damage model for brittle solids with interacting microcracks

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

Analysis of Mode-I Crack Tip Shielding by Microcracking in Brittle Materials

Fracture-damage Coupled Analysis for Modeⅰcracking in Concrete under Static Load

A Thermodynamical Consistent Microplane Plastic-Damage Model For Concrete

Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials

Semi-analytical expressions to describe stress fields near the tip of Mode-I crack under plane-strain conditions

Micro-crack Damage in Strip of Fracture Process Zone

Three-Dimensional Micromechanical Model for Quasi-Brittle Solids with Residual Strains under Tension

Cohesive Damage Zone Model for A Circular Crack in A Quasi-Brittle Solid

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials

Quasi-Micromechanical Constitutive Theory for Brittle Damaged Materials under Tension

Crack-tip Fields of an Anti-Plane Crack in Micropolar Elastic Solids