Abstract:The fracture properties of concrete are affected by various factors, including material parameters and crack geometry parameters. In the paper, pure mode I fracture and mixed mode fracture of concrete bending beams under impact load were studied experimentally and numerically. Numerical models by applying extended finite element method based on the cohesive crack model were employed to simulate pure mode I fracture and mixed mode fracture of concrete bending beams, an experimental program was conducted to validate the numerical models. The effects of material parameters as well as crack geometry parameters on the fracture properties of concrete bending beams were discussed and the most sensitive parameter to affect the fracture properties of concrete bending beams was determined based on the numerical simulations. The results show that the simulation results match reasonably well with the experimental results. For pure mode I fracture, concrete strength grade is proved to have less influence on the fracture properties of concrete bending beams under relative high strength grade condition; Elastic modulus was determined to have the greatest impact on the fracture properties of concrete bending beams, followed by tensile stress, initial crack length and fracture energy; however, Poisson ratio have almost no effect on the fracture properties of concrete bending beams. For mixed mode fracture problem, the influences of initial notch position on crack propagation path can be expressed as a competition between mode I fracture and mixed mode fracture, with offset parameter increasing from 0.0 to 1.0, the fracture failure mode of concrete bending beams changes from pure mode I fracture to mixed mode fracture, followed by both mode I and mixed mode fractures, and finally translates to mode I fracture.

Fracture-damage Coupled Analysis for Modeⅰcracking in Concrete under Static Load

New concrete cracking model established based on fracture mechanics and damage theory

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Multicrack Anisotropic Elastoplastic Degradation Model for Concrete: Theory and Its Application to Mode Ⅰ Fracture

CRACK MODEL OF REINFORCED CONCRETE BASED ON STRAIN DECOMPOSITION METHOD

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Mechanical properties and numerical simulation of crack interface in reinforced concrete

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

3D Mesoscale Fracture Analysis of Concrete under Complex Loading

Parametric analysis of dynamic crack propagation of concrete bending beam based on the extended finite element method

Tensile-shear Mixed Mode Fracture Analysis of Concrete-Rock Material by Distinct Element Method

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD

Multiscale Analysis of Concrete Damage and Crack Propagation Under High Cycle Loading

Mode Ⅰ-concrete Fracture Analysis Using a Discontinuous Medium Mechanics Model

An embedded cohesive crack model for finite element analysis of mixed mode fracture of concrete

Analysis of the Whole Fracture Process of Concrete Considering Effects of Cohesive Distribution