Abstract:Thermal barrier coatings (TBCs) material has excellent high-temperature resistance and heat insulation performance, which plays a vital role in improving the working efficiency and running life of the engine. During the flight, the engine will inhale dust particles in the air. These particles are mostly from siliceous debris, which are usually called calcium magnesium aluminum silicate (CMAS). At present, CMAS corrosion has become one of the important problems affecting the service life of thermal barrier coatings. In this study, conventional yttrium oxide stabilized zirconia (YSZ) coatings and ytterbium oxide and yttrium oxide co-stabilized zirconia (YbYSZ) coatings were prepared by atmospheric plasma spraying. The two coatings were examined under thermal cycling-CMAS coupling conditions and divided into six life stages. The failure modes, CMAS permeation behavior, crack characteristics and mechanical properties of the two coatings at different life stages were evaluated systematically. The experimental results show that the YbYSZ coating has a longer life than YSZ coating under the thermal cycling and CMAS coupling condition, which increases by about 83% compared with the conventional YSZ coating. In the whole life stage, the porosity of YbYSZ coating is always higher than that of YSZ coating. The phase transition is not the reason for the failure and spalling of the coatings. The crack length of the two coatings showed an increasing trend, but the crack length of the YSZ coating was higher than that of the YbYSZ coating, and the crack density of the two coatings showed a "saddle shape", which was more obvious for the YSZ coating. The YbYSZ coating shows better mechanical properties under the thermal cycling-CMAS coupling condition with the evolution of life.

Buckling failure in air-plasma sprayed thermal barrier coatings induced by molten silicate attack

Phase transformation failure in YSZ TBCs induced by component-dependent CMAS corrosion

Corrosion Behavior of Sc2O3–Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coatings with CMAS Attack

Air Plasma-Sprayed Yttria and Yttria-Stabilized Zirconia Thermal Barrier Coatings Subjected to Calcium-Magnesium-Alumino-Silicate (CMAS)

Pore Filling Behavior of Air Plasma Spray Thermal Barrier Coatings under CMAS Attack

Experimental and Simulation Analysis of the Evolution of Residual Stress Due to Expansion Via CMAS Infiltration in Thermal Barrier Coatings

Unraveling the CMAS Corrosion Mechanism of APS High-Yttria-stabilized Zirconia Thermal Barrier Coatings

Failure Mechanism of EB-PVD Thermal Barrier Coatings under the Synergistic Effect of Thermal Shock and CMAS Corrosion

Wetting, infiltration, and interaction behavior of calcium-magnesium-alumino-silicate towards Gd/Yb-modified SrZrO3 coatings deposited by solution precursor plasma spray

Thermal shock performance and failure behavior of Zr6Ta2O17-8YSZ double-ceramic-layer thermal barrier coatings prepared by atmospheric plasma spraying

Pore Filling Behavior of YSZ under CMAS Attack: Implications for Designing Corrosion‐resistant Thermal Barrier Coatings

A New Al2O3‐Protected EB‐PVD TBC with Superior CMAS Resistance

Failure Analysis of Fine-Lamellar Structured Ysz Based Thermal Barrier Coatings with Submicro/Nano-Grains

Thermal Cycling Lives of Plasma Sprayed YSZ Based Thermal Barrier Coatings in a Burner Rig Corrosion Test

The Crack Behavior and Delamination Mechanisms of Air Plasma Sprayed Thermal Barrier Coatings under Ultrasonic Plasma Jet at 1600 °C

Effect of Morphology, Impact Velocity and Angle of the CaO-MgO-Al2O3-SiO2 (CMAS) Particle on the Erosion Behavior of Thermal Barrier Coatings (TBCs): A Finite Element Simulation Study

Damage Grading Evaluation of Thermal Barrier Coatings under CMAS Corrosion

Microcrack Propagation Induced by Dynamic Infiltration of Calcium-Magnesium-alumino-silicate in Columnar Structures for Thermal Barrier Coatings

Microstructural evolution and corrosion mechanism of thermal/environmental barrier coatings against molten calcium–magnesium–alumino–silicate

Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection

Cracking Behavior of Gd2Zr2O7/YSZ Multi-Layered Thermal Barrier Coatings Deposited by Suspension Plasma Spray