Abstract:Background: Monolithic or semi-monolithic detectors are attractive for positron emission tomography (PET) scanners with depth-of-interaction (DOI) capability. However, they often require complicated calibrations to determine the interaction positions of gamma photons. Purpose: We introduce a novel hybrid detector design that combines pixelated and semi-monolithic elements to achieve DOI capability while simplifying the calibrations for positioning. Methods: A prototype detector with eight hybrid lutetium-yttrium oxyorthosilicate (LYSO) layers having dimensions of 25.8 × 12.9 × 15 mm3 was constructed. The energy-weighted and energy-squared weighted averages were used for estimating the x- (pixelated direction) and y-positions (non-pixelated direction). Pseudo-pixels were defined as discrete areas on the flood image based on the crystal look-up table (LUT). The intrinsic spatial resolutions in the pixelated and non-pixelated directions were measured. The ratio of the maximum to the sum of the multipixel photon counter (MPPC) signals was used to estimate the DOI positions. The coincidence timing resolution (CTR) was measured using the average and energy-weighted average of the earliest n time stamps. Two energy windows of 250-700 and 400-600 keV were applied for the measurements. Results: The pattern of the flood images showed discrete event clusters, demonstrating that simple calibrations for determining the x- and y-positions of events could be achieved. Under 400-600 keV energy window, the average intrinsic spatial resolutions were 1.15 and 1.34 mm for the pixelated and non-pixelated directions; the average DOI resolution of the second row of pseudo-pixels was 5.1 mm in full width at half maximum (FWHM); when using the energy-weighted average of the earliest four-time stamps, the best CTR of 350 ps was achieved. Applying a broader energy window of 250-700 keV only slightly degrades the DOI resolution while maintaining the intrinsic resolution; the best CTR degrades to 410 ps. Conclusions: The proposed hybrid detector concept was verified, and a prototype detector showed high performance for 3D positioning and timing resolution. The novel detector concept shows promise for preclinical and clinical PET scanners with DOI capability.

Evaluation of Timepix Silicon Detector for the Detection of 18F Positrons

Enhancing spatial resolution of (18)F positron imaging with the Timepix detector by classification of primary fired pixels using support vector machine

Design and characterization of a hybrid PET detector with DOI capability

Probability distribution maps of deposited energy with sub-pixel resolution for Timepix3 detectors

Radiation Measurements Using Timepix3 with Silicon Sensor and Bare Chip in Proton Beams for FLASH Radiotherapy

High-count-rate Particle Tracking in Proton and Carbon Radiotherapy with Timepix2 Operated in Ultra-Short Acquisition Time

Liquid Xenon Detectors for Positron Emission Tomography

High Resolution TOF-PET Detectors by Using Dual-Ended Readout with SiPM Arrays of Different Pixel Sizes on Each End

A time-based single transmission-line readout with position multiplexing

The high count rate performance of a two-dimensionally position-sensitive detector for positron emission tomography.

New Digital Plug and Imaging Sensor for a Proton Therapy Monitoring System Based on Positron Emission Tomography.

Time calibration studies for the Timepix3 hybrid pixel detector in electron microscopy

Evaluation of a PET detector based on SiPMs and FPGA-only MVT digitizers

Silicon Carbide Timepix3 detector for quantum-imaging detection and spectral tracking of charged particles in wide range of energy and field-of-view

Simulation of a Compton-based detector for low-dose high-resolution time-of-flight positron emission tomography

Scintillation and Cherenkov photon counting detectors with analog silicon photomultipliers for TOF-PET

Study of electron tracks in Timepix3 detector at kinetic energies of 1 and 1.5 MeV

Design and Evaluation of LYSO/SiPM LIGHTENING PET Detector with DTI Sampling Method

DOI- and TOF-capable PET Array Detector Using Double-Ended Light Readout and Stripline-Based Row and Column Electronic Readout

Characterisation of a customised 4-chip Timepix3 module for charged-particle tracking

Time structures of proton pencil beam scanning delivery on a microsecond scale measured with a pixelated semiconductor detector Timepix3