Abstract:Cracks that may cause pipeline cracking and leakage become the main risk of in-service pipelines after conventional metal loss defects have been detected. Therefore, it is imperative to develop ultra-high-definition magnetic flux leakage (MFL) detection for cracks. Due to the larger spatial sampling interval of conventional MFL inspections than the crack defect width, sparse sampling will result in problems such as missed detection of crack defects or insufficient signal sampling of crack defect MFL signals. To address the problem, this paper presents a detection topology in which the magnetic field signal is integrated first and then sampled, and it can effectively sample the leakage magnetic field of cracks. Furthermore, a magnetic field spatial integration (MFSI) method is proposed based on the magnetic dipole model, which develops an analytical solution for the depth quantification of crack defects. Using the multi-MFL spatial integral values under different lift offs, iterative equations are constructed, and the numerical solution for the width quantification of crack defects is provided. The finite element simulation and physical experiment are constructed. And, the results show that the proposed MFSI method can realize the quantification of crack size. When the crack defect aspect ratio is greater than 4, the quantization error of the crack depth and width does not exceed 0.7 mm and 0.1 mm, respectively. The robustness of the MFSI method for crack quantification is also discussed and verified. Moreover, based on theoretical analysis and simulation data, this paper concludes that the distribution of cracks MFL signal is width-insensitive, which would cause that classic MFL opening profile recognition methods for metal loss defects are no longer applicable to crack defects. Therefore, the proposed MFSI method is useful and meaningful for crack defect quantification in ultra-high-definition MFL detection.

Micorcrack Localization in Pipelines Using Nonlinear Guided Waves Combined with Time Reversal

Detection of fatigue-induced micro-cracks in a pipe by using time-reversed nonlinear guided waves: a three-dimensional model study.

Scattering of Torsional Flexural Guided Waves from Circular Holes and Crack-Like Defects in Hollow Cylinders

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

A Study of Inner Crack Testing with the Laser Phased Array Method.

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

The application of a reflected non-axisymmetric torsional guided wave model for imaging crack-like defects in small-diameter pipes

Differential Electromagnetic Acoustic Probes for Quantitative Detection of Pipeline Cracks

Imaging of Nonaxisymmetric Area Discontinuities in Pipes Using Guided Wave Synthetic Focusing

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Guided Wave Imaging of Oblique Reflecting Interfaces in Pipes Using Common-Source Synthetic Focusing

Multi-crack Imaging Using Nonclassical Nonlinear Acoustic Method

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Multiple Cracks Detection in Pipeline Using Damage Index Matrix Based on Piezoceramic Transducer-Enabled Stress Wave Propagation

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Evaluation of the shape and size of 3D cracks using microwaves

Quantitative Detection of Pipeline Cracks Based on Ultrasonic Guided Waves and Convolutional Neural Network

A simulation study of ultrasonic imaging of micro-crack in bone based on time-reversed approach

A Novel Crack Quantification Method for Ultra-High-Definition Magnetic Flux Leakage Detection in Pipeline Inspection