Abstract:In this paper we evidenced a broadband transmission from middle infrared to radio spectrum and a band-pass transmission in far infrared based on a sandwich grating structure, which consists a dielectric grating and two metallic covering layers on the top and bottom side of it. It indicates that broadband polarizer or band-pass filter can be inspired from the structure. As a polarizer, the extinction ratio is about 50dB in middle infrared which increases as the wavelength increases; over 90% transmittance for TM polarized light can be maintained from middle infrared to radio spectrum, which doesn’t degrade for incident angle from 0° to 60° . As a band-pass filter working in far infrared region, the resonant transmission peak can be tuned by either varying the thicknesses of the dielectric grating layer or of the metallic coverings. When the resonant transmission peak is tuned from shorter to longer wavelength by increasing the thickness of dielectric grating, the peak transmittance is increased from 61% to 93%, with full width at half maximum (FWHM) bandwidth increases from 13% to 20%. Besides, in order to achieve high peak transmission, the thickness of metallic coverings should be optimized. In consideration of physical mechanism, the step-boosted characteristic of broadband transmission is contributed by the first-order Fabry-Perot (FP)-like cavity resonance supported in the dielectric grating layer along the horizontal direction, while the band-pass transmission is a hybridization resonant mode of the first order FP-like cavity resonance along the horizontal direction and the first-order FP-like cavity resonance along the vertical direction supported in the dielectric grating layer.

Broadband and Wide Angle Infrared Wire-Grid Polarizer.

Integrated Structure of Polarization Detection in the Visible Spectrum Based on Double Wire Grids

Large‐Area Wire Grid Polarizer with High Transverse Magnetic Wave Transmittance and Extinction Ratio for Infrared Imaging System

Wideband Infrared Metal Wire Grating Polarizer Using Holographic Lithography and Lift-off Process

Broadband Polarizer or Band-Pass Filter Based on A Dielectric Grating with Top and Bottom Metallic Coverings

Design and Fabrication of Sub-Wavelength Metal Wire-Grid and Its Application to Experimental Study of Polarimetric Imaging

Ultrabroadband Two-Layer Dielectric/metal on a Silica Substrate Hybrid Grating Polarizer

Broadband Integrated Polarization Rotator Using Three-Layer Metallic Grating Structures

Broadband Polarizing Beam Splitter with an Embedded Metal-Wire Nanograting.

Three-layer Polarization-Selective Dielectric Transmission Grating with the Enhanced Angular Bandwidth

High Performance Polarizing Beam Splitter With Embedded Metal-Wire Nanograting

High-performance Large-Area Ultra-Broadband (UV to IR) Nanowire-Grid Polarizers and Polarizing Beam-Splitters

Design and fabrication of an encapsulated broadband infrared wire-grid polarizer for an infrared imaging system

Reflection-type transparent metamaterial polarization rotator with ultra-wide bandwidth

Notice of Removal: A Broadband Reflective Polarization Converter Based on the Metallic Grating

Development of Broadband Polarizing Beam Splitter/Combiner

Design of extreme ultraviolet wire grid polarizers by vacuum guiding

Multi-Wavelength Polarizer Based on Metal Grating-Assisted Microstructured Fiber

Polarization-sensitive metamaterial absorber based on the composite grating structure in the long-wave infrared band

An Ultrasmall Broad-band Polarizer Based on a Metal-Insulator-metal Waveguide Bragg Grating

Broad Bandwidth And High Extinction Ratio Waveguide Polarizer Via Grating Mediated Mutual Mode Conversion