Abstract:On-chip optical resonators have proven to be a promising platform for generating Kerr frequency combs. Whispering gallery mode resonators are particularly attractive because of their small footprint as well as low threshold and power consumption. This performance can be attributed to two characteristics: the cavity quality factor (Q) and the cavity dispersion. The input optical field into the cavity is amplified by the cavity Q, enabling nonlinear processes to occur with low input powers. In addition, the total span of the optical comb is governed by the dispersion. In an optical cavity-based comb, the dispersion is governed by the geometric dispersion of the cavity and the material dispersion. While many different materials have been explored, the realization of ultrahigh Q (UHQ) on-chip frequency comb sources is still challenging for most materials. One exception is the family of integrated silica devices. However, because the silica attracts water molecules from the ambient environment, the lifetime of the device performance is fundamentally limited, unless packaged in a controlled atmosphere. Here, we demonstrate the generation of environmentally stable frequency combs fabricated from SiO1.7N0.13 microtoroidal resonators. Due to the UHQ factors of the cavities, parametric oscillations with submicrowatt thresholds are demonstrated. Based on their geometry and material properties, the cavities have normal dispersion. However, due to avoided mode crossing, frequency combs are generated. Finally, unlike SiO2, SiO1.7N0.13 inhibits the formation of a water monolayer, allowing submicrowatt performance to be maintained for over a week in devices stored with minimal environmental controls.

Thermal tuning of Kerr frequency combs in silicon nitride microring resonators

Tunable Frequency Comb Generation from a Microring with a Thermal Heater

Adjustable Repetition Rate Kerr Frequency Combs in an Integrated Silica Microring

On-chip Kerr parametric oscillation with integrated heating for enhanced frequency tuning and control

Reduction of thermal instability of soliton states in coupled Kerr-microresonators

Investigation of mode coupling in normal-dispersion silicon nitride microresonators for Kerr frequency comb generation

Theoretical analysis of a mid-infrared Kerr frequency comb in a graphene-on-silicon micro-resonator

Normal dispersion silicon oxynitride microresonator Kerr frequency combs

Kerr Combs from Normal and Anomalous Dispersion Silicon Nitride Microresonators

Tuning Kerr-Soliton Frequency Combs to Atomic Resonances

Experimental Observation of Raman Assisted and Kerr Optical Frequency Comb in a 4H-Silicon-Carbide on Insulator Microresonator

Coherent Kerr frequency comb generation in microresonators with χ (2) and χ (3) nonlinearities

Performance evaluation of silicon-chip-based mid-infrared Kerr optical frequency combs with ridge cross section

Universal Dynamics of Kerr Frequency Comb Formation in Microresonators

Monolithic lithium niobate photonic circuits for Kerr frequency comb generation and modulation

High-Q Si3N4 microresonators based on a subtractive processing for Kerr nonlinear optics

Normal-dispersion microcombs enabled by controllable mode interactions

Offset Frequency Tuning Of A Microcomb With An Integrated Microheater

Efficient Generation of a Near-visible Frequency Comb via Cherenkov-like Radiation from a Kerr Microcomb

Coherent Kerr Frequency Comb Generation In Microresonators With Chi((2)) And Chi((3)) Nonlinearities

Programmable Single-Bandpass Photonic RF Filter Based on Kerr Comb from a Microring