Tunable Frequency Comb Generation from a Microring with a Thermal Heater

Xiaoxiao Xue,Yi Xuan,Pei-Hsun Wang,Jian Wang

DOI: https://doi.org/10.1364/cleo_si.2014.sf1i.8

2014-01-01

Abstract:We demonstrate a novel comb tuning method for microresonator-based Kerr comb generators. Continuously tunable, low-noise, and coherent comb generation is achieved in a CMOS-compatible silicon nitride microring resonator.

What problem does this paper attempt to address?

Thermal tuning of Kerr frequency combs in silicon nitride microring resonators

xiaoxiao xue,yi xuan,cong wang,peihsun wang,yang liu,ben niu,daniel e leaird,minghao qi,andrew m weiner

DOI: https://doi.org/10.1364/OE.24.000687

IF: 3.8

2016-01-01

Optics Express

Abstract:Microresonator based Kerr frequency comb generation has many attractive features, including ultrabroad spectra, chip-level integration, and low power consumption. Achieving precise tuning control over the comb frequencies will be important for a number of practical applications, but has been little explored for microresonator combs. In this paper, we characterize the thermal tuning of a coherent Kerr frequency comb generated from an on-chip silicon nitride microring. When the microring temperature is changed by similar to 70 degrees C with an integrated microheater, the line spacing and center frequency of the comb are tuned respectively by -253 MHz (-3.57 MHz/degrees C) and by -175 GHz (-2.63 GHz/degrees C); the latter constitutes 75% of the comb line spacing. From these results we obtain a shift of 25 GHz (362.07 MHz/degrees C) in the comb carrier-envelope offset frequency. Numerical simulations are performed by taking into account the thermo-optic effects in the waveguide core and cladding. The temperature variation of the comb line spacing predicted from simulations is close to that observed in experiments. The time-dependent thermal response of the microheater based tuning scheme is characterized; time constants of 30.9 mu s and 0.71ms are observed. (C) 2015 Optical Society of America
Soliton microcomb generation by manual microheater tuning

Bofan Yang,Xiaoxiao Xue,Shangyuan Li,Xianbin Yu,Jian Wang,Xiaoping Zheng

DOI: https://doi.org/10.1364/acpc.2020.s3i.5

2020-01-01

Abstract:Accessing thermally stable solitons in microresonators generally requires complex laser tuning with a carefully selected speed. Here, we demonstrate a simplified method by manual microheater tuning with the aid of an auxiliary laser. © 2020 The Author(s).
Adjustable Repetition Rate Kerr Frequency Combs in an Integrated Silica Microring

Yiqing Xu,Yi Lin,Alexander U. Nielsen,Ian Hendry,Stephane Coen,Miro Erkintalo,Huilian Ma,Stuart G. Murdoch

DOI: https://doi.org/10.1364/cleo_si.2020.stu3h.2

2020-01-01

Abstract:We generate Kerr frequency combs in a synchronously-driven silica microring resonator. Driving at integer (and fractional) multiples of the cavity free-spectral-range, we obtain soliton microcombs with adjustable comb spacings between 3.2 and 19.2 GHz.
Mode-Locked And Repetition-Rate-Tunable Comb Generation Using Dual Coupled Microrings

xiaoxiao xue,yi xuan,peihsun wang,yang liu,daniel e leaird,minghao qi,andrew m weiner

DOI: https://doi.org/10.1364/cleo_si.2015.sf1d.6

2015-01-01

Abstract:A method incorporating controllable mode interaction is proposed for Kerr frequency comb generation in normal-dispersion microresonators. Repetition-rate-tunable combs and broadband mode-locking transitions are demonstrated by using dual silicon nitride microrings.
Continuously Tunable Time Delay and Advance in Coupling-Modulated Microring Resonators

Yingtao Hu,Xi Xiao,Xianyao Li,Kang Xiong,Zhiyong Li,Yuntao Li,Tao Chu,Yude Yu,Jinzhong Yu

DOI: https://doi.org/10.1117/12.920404

2011-01-01

Abstract:We experimentally demonstrate continuously tunable optical time delay and advance using coupling-modulated microring resonators (CMR) with a 15-mu m radius. By modulating the coupling coefficient through thermo-optical effect based on micro-heater, the coupling state of the microring is flexibly controlled; as a result, a large dynamic time tuning range (from time advance to delay) is achieved. The CMR device based on SOI is fabricated with commercial 0.18-mu m CMOS technology. A novel micro-heater structure was firstly used to thermally tune the coupling state of the micoring. Pulse delay and advance from -15 ps to 85 ps is experimentally realized.
On-chip Kerr parametric oscillation with integrated heating for enhanced frequency tuning and control

Jordan Stone,Daron Westly,Gregory Moille,Kartik Srinivasan

2024-04-18

Abstract:Nonlinear microresonators can convert light from chip-integrated sources into new wavelengths within the visible and near-infrared spectrum. For most applications, such as the interrogation of quantum systems with specific transition wavelengths, tuning the frequency of converted light is critical. Nonetheless, demonstrations of wavelength conversion have mostly overlooked this metric. Here, we apply efficient integrated heaters to tune the idler frequency produced by Kerr optical parametric oscillation in a silicon-nitride microring across a continuous 1.5 terahertz range. Finally, we suppress idler frequency noise between DC and 5 kHz by several orders of magnitude using feedback to the heater drive.

Optics
Normal-dispersion microcombs enabled by controllable mode interactions

Xiaoxiao Xue,Yi Xuan,Pei‐Hsun Wang,Yang Liu,Dan E. Leaird,Minghao Qi,Andrew M. Weiner,Pei-Hsun Wang

DOI: https://doi.org/10.1002/lpor.201500107

2015-07-01

Abstract:We demonstrate a scheme incorporating dual‐coupled microresonators through which mode interactions are intentionally introduced and controlled for Kerr frequency comb (microcomb) generation in the normal‐dispersion region. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings controlled via an on‐chip microheater. The proposed scheme shows for the first time a reliable design strategy for normal‐dispersion microcombs and may make it possible to generate microcombs in an extended wavelength range (e.g. in the visible) where normal material dispersion is likely to dominate. Microcomb generation, repetition rate selection, and mode locking are achieved with coupled silicon nitride microrings constructed from single‐mode waveguides. Mode interactions are controlled via an on‐chip microheater for reliable microcomb initiation. The proposed scheme shows for the first time a reliable design strategy for normal‐dispersion microcomb generation and may make it possible to generate microcombs in an extended wavelength range (e.g. in the visible) where material dispersion is likely to dominate.

physics, condensed matter,optics, applied
Efficient Generation of a Near-visible Frequency Comb via Cherenkov-like Radiation from a Kerr Microcomb

Xiang Guo,Chang-Ling Zou,Hojoong Jung,Zheng Gong,Alexander Bruch,Liang Jiang,Hong X. Tang

DOI: https://doi.org/10.1103/physrevapplied.10.014012

IF: 4.6

2018-01-01

Physical Review Applied

Abstract:Optical frequency combs enable state-of-the-art applications including frequency metrology, optical clocks, astronomical measurements, and sensing. Recent demonstrations of microresonator-based Kerr frequency combs or microcombs pave the way to scalable and stable comb sources on a photonic chip. Generating microcombs in the short-wavelength range, however, has been limited by large material dispersion and optical loss. Here we demonstrate a scheme for efficiently generating microcombs near the edge of the visible spectrum in a high-Q aluminum nitride microring resonator. The enhanced Pockels effect strongly couples infrared and near-visible modes into hybrid mode pairs, which participate in the Kerr microcomb generation process and lead to strong Cherenkov-like radiation in the near-visible band an octave apart. A surprisingly high on-chip conversion efficiency of 22% is achieved from a pulsed pump laser to the near-visible comb. As a result of pulse pumping, the generated microcombs are in the chaotic state. We further demonstrate a robust frequency tuning of the near-visible comb by more than one free spectral range and apply it to the absorption spectroscopy of a water-based dye molecule solution. Our work is a step towards high-efficiency visible microcomb generation and its utilization, and it also provides insights into the significance of the Pockels effect and its strong coupling with Kerr nonlinearity in a single microcavity device.
Coherent Kerr Frequency Comb Generation In Microresonators With Chi((2)) And Chi((3)) Nonlinearities

Xiaoxiao Xue,Yi Xuan,Jose A. Jaramillo-Villegas,Pei-Hsun Wang,Yang Liu,Daniel E. Leaird,Minghao Qi,Andrew M. Weiner

2016-01-01

Abstract:Optical frequency comb generation due to interplay between second-order and third-order nonlinearities is demonstrated in a silicon nitride microring resonator which shows normal group velocity dispersion for the fundamental wave. Mode-locked bright and dark pulses are generated at the through and drop ports respectively.
Coherent Kerr frequency comb generation in microresonators with χ (2) and χ (3) nonlinearities

Xiaoxiao Xue,Yi Xuan,Jose A. Jaramillo-Villegas,Pei-Hsun Wang,Yang Liu,Daniel E. Leaird,Minghao Qi,Andrew M. Weiner

DOI: https://doi.org/10.1109/IPCon.2016.7831235

2016-01-01

Abstract:Optical frequency comb generation due to interplay between second-order and third-order nonlinearities is demonstrated in a silicon nitride microring resonator which shows normal group velocity dispersion for the fundamental wave. Mode-locked bright and dark pulses are generated at the through and drop ports respectively.
Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators

Chaitanya Joshi,Jae K. Jang,Kevin Luke,Xingchen Ji,Steven A. Miller,Alexander Klenner,Yoshitomo Okawachi,Michal Lipson,Alexander L. Gaeta

DOI: https://doi.org/10.1364/ol.41.002565

IF: 3.6

2016-01-01

Optics Letters

Abstract:We report, to the best of our knowledge, the first demonstration of thermally controlled soliton mode-locked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton mode-locked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of mode-locked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy.
Efficient visible frequency comb generation via Cherenkov radiation from a Kerr microcomb

Xiang Guo,Chang-Ling Zou,Hojoong Jung,Zheng Gong,Alexander Bruch,Liang Jiang,Hong X. Tang

DOI: https://doi.org/10.48550/arXiv.1704.04264

2017-04-13

Optics

Abstract:Optical frequency combs enable state-of-the-art applications including frequency metrology, optical clocks, astronomical measurements, and sensing. Recent demonstrations of microresonator-based Kerr frequency combs or microcombs pave the way to scalable and stable comb sources on a photonic chip. Generating microcombs in the visible wavelength range, however, has been limited by large material dispersion and optical loss. Here we demonstrate a scheme for efficiently generating visible microcomb in a high Q aluminum nitride microring resonator. Enhanced Pockels effect strongly couples infrared and visible modes into hybrid mode pairs, which participate in the Kerr microcomb generation process and lead to strong Cherenkov radiation in the visible band of an octave apart. A surprisingly high conversion efficiency of 22% is achieved from the pump laser to the visible comb. We further demonstrate a robust frequency tuning of the visible comb by more than one free spectral range and apply it to the absorption spectroscopy of a water-based dye molecule solution. Our work marks the first step towards high-efficiency visible microcomb generation and its utilization, and it also provides insights on the significance of Pockels effect and its strong coupling with Kerr nonlinearity in a single microcavity device.
Offset Frequency Tuning Of A Microcomb With An Integrated Microheater

Xiaoxiao Xue,Yi Xuan,Cong Wang,Pei-Hsun Wang,Yang Liu,Daniel E. Leaird,Minghao Qi,Andrew M. Weiner

DOI: https://doi.org/10.1364/cleo_si.2016.stu3q.2

2016-01-01

Abstract:Carrier-envelope offset frequency tuning of a microcomb over 25 GHz is demonstrated based on the thermo-optic effect (362.07 +/- 4.16 MHz/degrees C). Thermal response time constants of 30.9 mu s and 0.71 ms are observed.
Octave-spanning frequency comb generation in a silicon nitride chip

Yoshitomo Okawachi,Kasturi Saha,Jacob S. Levy,Y. Henry Wen,Michal Lipson,Alexander L. Gaeta

DOI: https://doi.org/10.1364/ol.36.003398

IF: 3.6

2011-08-26

Optics Letters

Abstract:We demonstrate a frequency comb spanning an octave via the parametric process of cascaded four-wave mixing in a monolithic, high-Q silicon nitride microring resonator. The comb is generated from a single-frequency pump laser at 1562 nm and spans 128 THz with a spacing of 226 GHz, which can be tuned slightly with the pump power. In addition, we investigate the RF amplitude noise characteristics of the parametric comb and find that the comb can operate in a low-noise state with a 30 dB reduction in noise as the pump frequency is tuned into the cavity resonance.

optics
Linear and Nonlinear Mode Coupling in Microresonator Frequency Comb Generation

Xiaoxiao Xue

DOI: https://doi.org/10.1364/iprsn.2018.jw3i.1

2018-01-01

Abstract:The Kerr comb dynamics in microresonators can be severely affected by linear and nonlinear mode coupling, providing a tool to enable comb generation in the normal dispersion region which is originally prohibited.
Ultrasmall Thermally Tunable Microring Resonator With a Submicrometer Heater on Si Nanowires

Daoxin Dai,Liu Yang,Sailing He

DOI: https://doi.org/10.1109/JLT.2007.915274

2008-01-01

Abstract:An ultracompact widely tunable thermooptical (TO) microring resonator (MRR) filter based on Si nanowires is presented. The Si nanowire waveguide has a insulator, Si core, a up-cladding, and a thin metal film at the top. The metal circuit along the microring is used as a submicrometer heater which has the same width as the Si nanowire waveguide. The up-cladding is optimized to reduce the light absorption of the metal as well as to have a good heat-conduction from the heater to the Si core. Two pads used as the contact points for the probes connecting to the electrical power are perpendicularly connected to the microring by using optimized T-junctions (with a low excess loss of about 0.06 dB per T-junction). With such a design, the present thermally tunable microring resonator (MRR) can be fabricated by using a standard fabrication process with a single lithography process, which is much simpler than the fabrication with double lithography processes used for the conventional TO components. Finally, the simulation results show that the designed MRR has a wide tuning range of about 20 nm with a low heating power of 5 mW.
Robust and Controllable Generation of Frequency Combs in Microresonators with Selected Sideband Feedback

Yufeng Jiang,Xin Zhao,Jian Wang,Ben Niu,Ya Liu,Guoqing Hu,Pei-Hsun Wang,Minghao Qi,Andrew M. Weiner,Zheng

DOI: https://doi.org/10.1364/ofc.2014.th2a.57

2014-01-01

Abstract:With feedback and amplification at selected sidebands of a SiN microring spectrum, we achieve controllable line spacing in the generated comb under relaxed pumping conditions. Such reduced pump power requirement is beneficial for many applications.
Tuning Kerr-Soliton Frequency Combs to Atomic Resonances

Su-Peng Yu,Travis C. Briles,Gregory T. Moille,Xiyuan Lu,Scott A. Diddams,Kartik Srinivasan,Scott B. Papp

DOI: https://doi.org/10.1103/PhysRevApplied.11.044017

2018-10-16

Abstract:Frequency combs based on nonlinear-optical phenomena in integrated photonics are a versatile light source that can explore new applications, including frequency metrology, optical communications, and sensing. We demonstrate robust frequency-control strategies for near-infrared, octave-bandwidth soliton frequency combs, created with nanofabricated silicon-nitride ring resonators. Group-velocity-dispersion engineering allows operation with a 1064 nm pump laser and generation of dual-dispersive-wave frequency combs linking wavelengths between approximately 767 nm and 1556 nm. To tune the mode frequencies of the comb, which are spaced by 1 THz, we design a photonic chip containing 75 ring resonators with systematically varying dimensions and we use 50 $^\circ$C of thermo-optic tuning. This single-chip frequency comb source provides access to every wavelength including those critical for near-infrared atomic spectroscopy of rubidium, potassium, and cesium. To make this possible, solitons are generated consistently from device-to-device across a single chip, using rapid pump frequency sweeps that are provided by an optical modulator.

Optics
Generation of two-cycle pulses and octave-spanning frequency combs in a dispersion-flattened micro-resonator.

Lin Zhang,Chengying Bao,Vivek Singh,Jianwei Mu,Changxi Yang,Anuradha M Agarwal,Lionel C Kimerling,Jurgen Michel

DOI: https://doi.org/10.1364/OL.38.005122

IF: 3.6

2013-01-01

Optics Letters

Abstract:We show that octave-spanning Kerr frequency combs with improved spectral flatness of comb lines can be generated in dispersion-flattened microring resonators. The resonator is formed by a strip/slot hybrid waveguide, exhibiting a flat and low anomalous dispersion between two zero-dispersion wavelengths that are separated by one octave from near-infrared to mid-infrared. Such flattened dispersion profiles allow for the generation of mode-locked frequency combs, using relatively low pump power to obtain two-cycle cavity solitons on a chip, associated with the octave-spanning comb bandwidth. The wavelength dependence of the optical loss and of the coupling coefficient and thus wavelength dependent Q-factor are also considered. (C) 2013 Optical Society of America
Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators

Zexing Zhao,Chenyu Wang,Jingyuan Qiu,Zhilin Ye,Zhijun Yin,Kunpeng Jia,Xiaohui Tian,Zhenda Xie,Shi-Ning Zhu

2023-11-24

Abstract:Optical frequency comb based on microresonator (microcomb) is an integrated coherent light source and has the potential to promise a high-precision frequency standard, and self-reference and long-term stable microcomb is the key to this realization. Here, we demonstrated a 0.7-octave spectrum Kerr comb via dispersion engineering in a thin film lithium niobate microresonator, and the single soliton state can be accessed passively with long-term stability over 3 hours. With such a robust broadband coherent comb source using thin film lithium niobate, fully stabilized microcomb can be expected for massive practical applications.

Optics

Tunable Frequency Comb Generation from a Microring with a Thermal Heater

Thermal tuning of Kerr frequency combs in silicon nitride microring resonators

Soliton microcomb generation by manual microheater tuning

Adjustable Repetition Rate Kerr Frequency Combs in an Integrated Silica Microring

Mode-Locked And Repetition-Rate-Tunable Comb Generation Using Dual Coupled Microrings

Continuously Tunable Time Delay and Advance in Coupling-Modulated Microring Resonators

On-chip Kerr parametric oscillation with integrated heating for enhanced frequency tuning and control

Normal-dispersion microcombs enabled by controllable mode interactions

Efficient Generation of a Near-visible Frequency Comb via Cherenkov-like Radiation from a Kerr Microcomb

Coherent Kerr Frequency Comb Generation In Microresonators With Chi((2)) And Chi((3)) Nonlinearities

Coherent Kerr frequency comb generation in microresonators with χ (2) and χ (3) nonlinearities

Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators

Efficient visible frequency comb generation via Cherenkov radiation from a Kerr microcomb

Offset Frequency Tuning Of A Microcomb With An Integrated Microheater

Octave-spanning frequency comb generation in a silicon nitride chip

Linear and Nonlinear Mode Coupling in Microresonator Frequency Comb Generation

Ultrasmall Thermally Tunable Microring Resonator With a Submicrometer Heater on Si Nanowires

Robust and Controllable Generation of Frequency Combs in Microresonators with Selected Sideband Feedback

Tuning Kerr-Soliton Frequency Combs to Atomic Resonances

Generation of two-cycle pulses and octave-spanning frequency combs in a dispersion-flattened micro-resonator.

Passively stable 0.7-octave microcombs in thin-film lithium niobate microresonators