Abstract:High-voltage Li-ion batteries are anticipated to play a crucial role in the present transition towards electric vehicles, owing to their high energy density. However, a big challenge is the anodic stability (often referred to as corrosion) of the positive electrodes current collector, aluminum (Al), at potentials > 3.0 V vs . Li + /Li). In this work, we present a systematic study on the corrosion of 12 μm-thick Al foil (©Gränges, Sweden) up to 5.0 V vs . Li + /Li in a series of carbonate electrolytes containing lithium hexafluorophosphate (LiPF 6 ), lithium bis(fluorosulfonyl) imide (LiFSI) or lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) salts. The selection of the 12 μm foil was motivated by the need to decrease the mass or volume of the dead weight components (i.e., current collector) to increase the energy density of the battery. The electrochemical behavior was investigated using voltammetric techniques, and the results indicated that the anodic oxidation of the 12 μm Al foil was similar to that of the conventionally used 20 μm-thick Al foil. Notably, the first anodic oxidation scan exhibited a two-step oxidation after 3.5 V vs. Li + /Li, suggesting carbonate solvent oxidation and a liberation of H + ions attacking the native surface Al 2 O 3 layer followed by oxidation of metallic Al. A passivation was observed on the subsequent scans in 1.0 M LiPF 6 solutions due to formation of surface layer of AlF 3 , as confirmed by X-ray photoelectron spectroscopy (XPS) analyses. [1,2] However, in 1.0 M solutions of the imide salts (i.e., LiFSI or LiTFSI) a continuous anodic oxidation of aluminum was seen between 3.5 and 5.0 V vs. Li + /Li on the first few scans. After this the magnitude of the anodic current decreased significantly. The latter observations can be attributed to formation of soluble Al(TFSI) x or Al(FSI) x complexes [3] and a gradual saturation of the electrolyte. The voltammetric experiments showed that the magnitude of the anodic current increased when increasing the volume of the used imide electrolyte, supporting the saturation hypothesis. Results and analyses regarding the anodic oxidation of Al in a series of carbonate solvents and using different salt concentration, as well as effect of the use of carbon coated Al will also be presented. References: [1] S. T. Myung, Y. Sasaki, S. Sakurada, Y. K. Sun, H. Yashiro, Electrochim. Acta 2009 , 55 , 288. [2] C. Bizot, M.-A. Blin, P. Guichard, J. Hamon, V. Fernandez, P. Soudan, J. Gaubicher, P. Poizot, Electrochem. commun. 2021 , 126 , 107013. [3] M. Morita, T. Shibata, N. Yoshimoto, M. Ishikawa, J. Power Sources 2003 , 119 – 121 , 784.

Impact of Surface Microstructure and Properties of Aluminum Electrodes on the Plating/Stripping Behavior of Aluminum-Based Batteries Using Imidazolium-Based Electrolyte

Exploring the possibility of aluminum plating/stripping from a non‐corrosive Al(OTf)3‐based electrolyte

Modification of Al surface via acidic treatment and its impact on plating and stripping

In Situ Analytical Techniques: Solid Electrolyte Interface Analysis of Al Anode Materials for Al-Ion Batteries

Aluminum Alloys as Anodes for Aluminum Batteries

Toward Stable Al Negative Electrodes of Aluminum-Ion Batteries: Kinetic Parameters and Electrode Structure

Regulating electrodeposition morphology in high-capacity aluminium and zinc battery anodes using interfacial metal–substrate bonding

Revisiting the Anodic Stability of Aluminum Current Collectors in High-Voltage Li-Ion Batteries

Understanding The Reversible Electrodeposition of Al in Low-Cost Room Temperature Molten Salts

Understanding Aluminium Electrochemistry in Aqueous and Aqueous-Ionic Liquid Mixtures for Aluminium-Ion Batteries

Study on the Cathodic Behavior of Impurities in the Process of Aluminum Extraction by Soluble Anode Electrolysis

Optimization of an Artificial Solid Electrolyte Interphase Formed on an Aluminum Anode and Its Application in Rechargeable Aqueous Aluminum Batteries

Studies On The Anodic Behavior Of Aluminum Electrodes In Alkaline-Solution

Aluminum: an Underappreciated Anode Material for Lithium-Ion Batteries

Impact of surface modification of electrode for aluminium air batteries

Electrodeposition of Al Foil for the Collector of Lithium-Ion Batteries by Electrorefining in [Emim]cl-Alcl3 Ionic Liquid with O2− Ion at Room Temperature: Electrochemical Dissolution Behavior of Al Anode

Revealing the Effect of Aluminum Content on the Electrochemical Performance of Magnesium Anodes for Aqueous Batteries

Impurity Behavior in Aluminum Extraction by Low-Temperature Molten Salt Electrolysis

Exploring the Impact of In Situ-Formed Solid-Electrolyte Interphase on the Cycling Performance of Aluminum Metal Anodes

Surface Evolution of Aluminum Electrodes in Non-Aqueous Aluminum Batteries

A Comprehensive Study on the Parameters Affecting Magnesium Plating/Stripping Kinetics in Rechargeable Mg Batteries