Abstract:In past decades, organic solar cells (OSCs) have attracted much attention due to their advantages such as light weight, flexibility, variable color, adjustable band gap and roll-to-roll (R2R) manufacturing. Recently, the certificated power conversion efficiency (PCE) of single-junction OSCs has exceeded 18%, showing great potential for commercial applications. The outstanding performance of OSCs strongly depends on innovative research on the synthesis of efficient active materials. However, essential interfacial modification is also very critical because it can not only benefit charge extraction and transportation, but also effectively protect the active materials and thus improving the device performance. Therefore, various interfacial materials have been investigated intensively for highly efficient OSCs. Zinc oxide (ZnO) nanomaterials with excellent optoelectronic properties are considered to be one of the most promising candidates for electron transport layers (ETLs) of R2R printed OSCs. However, ETLs of the most common ZnO nanoparticles (NPs) inevitably have plenty of surface defects due to their high surface to volume ratio, which impairs the carrier transportation and collection. To address this concern, in this work, a composite film of ETL is designed for OSCs using the mixture of ZnO nanorods (NRs) and ZnO NPs. ZnO NRs with hexagonal crystal structure are synthesized by the solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results show that the intensity of diffraction peak (002) of ZnO NRs was significantly higher than that of diffraction peak (101) and peak (101), indicating that nanorods grow along the c-axis orientation. It is also found that the diameter and length of well-crystallized ZnO NRs range from 5 to 8 nm and from 15 to 40 nm, respectively. The ZnO NRs are introduced as the electron transport material for OSCs with the structure of ITO/PEDOT:PSS/PM6:Y7/ZnO NPs/ZnO NPs:NRs/Al. The prepared ZnO NRs are blended with ZnO NPs to achieve an optimal surface morphology of the ETL and enhanced light capture capability of the device. ETLs with different ratios of ZnO NRs to ZnO NPs are prepared. When the mass ratio of ZnO NRs reaches 50%, the ETL becomes dense and uniform without apparent cracks and pinholes, so the resultant OSCs achieve the best performance. The best device shows a short circuit current density (J(sc)) of 24.30 mA cm(-2), an open circuit voltage (V-oc) of 0.85 V, and a fill factor (FF) of 70.17%, corresponding to a champion PCE of 14.50%, which is higher than that of OSCs without ZnO NRs (PCE of 13.69% with J(sc) of 23.59 mA cm(-2), V-oc of 0.83 V and FF of 69.91%). Meanwhile, it is shown that the external quantum efficiency (EQE) curve of the optimal OSCs with ZnO NRs is higher than those of OSCs without ZnO NRs, which is consistent with the experimental results of J-V curve. The significant improvements attribute to the enhancement on the electron extraction and the light capture capability by the incorporation of ZnO NRs with excellent transport properties and the improved ETL morphology. Appropriately increased roughness after the incorporation of ZnO NRs also benefits the light absorption of the device. This work could come up with a new idea for the synthesis and application of ZnO-based interfacial materials in thin-film solar cells.

Controllable Length and Density ZnO@CdS Core/shell As Electron Transport Layer for Optimization of Organic Solar Cells

Interfacial Engineering of Zno Nanoarrays As Electron Transport Layer for Polymer Solar Cells

Dye-sensitized Nanoarrays with Discotic Liquid Crystals As Interlayer for High-Efficiency Inverted Polymer Solar Cells.

3-Dimensional ZnO/CdS Nanocomposite with High Mobility As an Efficient Electron Transport Layer for Inverted Polymer Solar Cells

Zinc Oxide Coated Carbon Dot Nanoparticles as Electron Transport Layer for Inverted Polymer Solar Cells

Core-Shell ZnO@SnO2 Nanoparticles for Efficient Inorganic Perovskite Solar Cells.

ZnO:Bio-inspired Polydopamine Functionalized Ti3C2Tx Composite Electron Transport Layers for Highly Efficient Polymer Solar Cells

Delicate Energy-Level Adjustment and Interfacial Defect Passivation of ZnO Electron Transport Layers in Organic Solar Cells by Constructing ZnO/In Nanojunctions

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Passivating ZnO with a Naphthalimide-Schiff Base As Electron Transport Layer for Inverted Polymer Solar Cells

Performance Improvement in Polymer/Zno Nanoarray Hybrid Solar Cells by Formation of Zno/Cds-Core/Shell Heterostructures

Solar Cells with Surface Modified Cs-Doped ZnO Nanorod Array As Electron Transporting Layer

The Modification of ZnO Surface with Natural Antioxidants to Fabricate Highly Efficient and Stable Inverted Organic Solar Cells

Enhanced Performance of Polymer Solar Cell with Zno Nanoparticle Electron Transporting Layer Passivated by in Situ Cross-Linked Three-Dimensional Polymer Network

Efficient inverted polymer solar cells incorporating doped organic electron transporting layer

Doping ZnO with Water/Alcohol-Soluble Small Molecules As Electron Transport Layers for Inverted Polymer Solar Cells.

N-Type Alcohol-Soluble Small Molecules As an Interfacial Layer for Efficient and Stable Polymer Solar Cells

Multiple Electron Transporting Layers and Their Excellent Properties Based on Organic Solar Cell

Solution-processed SnO(2 )nanoparticle Interfacial Layers for Efficient Electron Transport in ZnO-based Polymer Solar Cells

Correlating Annealing Temperature of ZnO Nanoparticle Electron Transport Layer with Performance of Inverted Polymer Solar Cells

Effects of ZnO Nanoparticle/nanorod Composite Films on the Performance of Organic Solar Cells