Abstract:The Spallation Neutron Source (SNS) is being designed, constructed, installed and commissioned by the staff of six national laboratories, Argonne National Laboratory, Brookhaven National Laboratory, Jefferson National Accelerator Laboratory, Lawrence Berkeley National Laboratory, Los Alamos National Laboratory, and Oak Ridge National Laboratory. The accelerator systems are designed to deliver a 695 ns proton-pulse onto a mercury target at a 60-Hz repetition rate and an average power of 2-MW. Neutron moderators that will convert the spallation neutrons into slow neutrons for material science research will surround the target. The Front-End systems are designed to generate an H- beam of minipulses, 68% beam on, 32% beam off every 965 ns, at 2.5 MeV for 1 ms, 60 times a second. The Front-End systems include a RF driven, volume-production ion source, beam chopping system, RFQ, and beam transport. The ion source will have to achieve about 65 mA to deliver 52 mA at the input to the linac. The linac consists of a drift tube linac up to 86.8 MeV, a coupled-cell linac to 185 MeV, and a superconducting RF linac to the nominal energy of 1 GeV. The design of the superconducting section includes 11 cryomodules with three, 0.61-beta cavities per cryomodule and 17 cryomodules with four, 0.81-beta cavities per cryomodule, with space to install four more 0.81-beta cryomodules. The accumulator ring is designed for charge exchange injection at full energy. The peak charge per bunch at the end of the accumulation cycle will reach 2.08x10**14 for 2-MW operation. The goal is to control beam losses to less than 1x10**-4.

Performance of Oak Ridge National Laboratory spallation neutron source proton power upgrade cavities and cryomodule production

rf improvements for Spallation Neutron Source H- ion source

An Overview of the Spallation Neutron Source Project

Dynamic systems modeling of the spallation neutron source cryogenic moderator system to optimize transient control and prepare for power upgrades

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

Technological developments and accelerator improvements for the FRIB beam power ramp-up

Novel Approaches to High-Power Proton Beams

Use of LANSCE Spallation Neutrons to Drive a Fusion Prototypic Neutron Source

High-gradient performance of a prototype accelerator cavity for a 3 GeV proton radiography booster

The operation and improvement of CSNS front end

An accelerator facility for intermediate energy proton irradiation and testing of nuclear materials

The Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - A Review of the first 8 Years of Operation

Optimization of LANSCE Proton Beam Performance for Isotope Production

A facility for radiation hardness studies based on a medical cyclotron

Upgrade of the fast analogue intra-pulse phase feedback at SPARC_LAB

Development of high intensity neutron source at the European Spallation Source

Erratum: Acceleration of uranium beam to record power of 10.4 kW and observation of new isotopes at Facility for Rare Isotope Beams ]

Full-Cycle Simulations of the Fermilab Booster

STATUS OF THE SUPERCONDUCTING PROTON LINAC (SPL) CRYO- MODULE

A fast-switching magnet serving a spallation-driven ultracold neutron source

SEEMS: A Single Event Effects and Muon Spectroscopy facility at the Spallation Neutron Source