Abstract:The modern world market makes stringent requirements for the quality of motor fuels, in particular for sulfur content in them. The main classes of sulfur-containing compounds in petroleum fractions are thiols, dialkyl and cycloalkyl sulfides, alkylaryl sulfides, as well as heteroaromatic compounds – benzothiophene, dibenzothiophene and their alkyl derivatives. They have a negative impact on the quality of petroleum products. Growing demands on the quality of oil and petroleum products have led to the search for ways to reduce the sulfur content in oils and which would not lead to deterioration of physicochemical parameters of oil, such as viscosity, density, acidity, elemental and fractional composition, etc. Among the existing methods of desulfurization of oils and their fractions, special attention is drawn to oxidation methods that allow organic sulfur compounds to be converted into sulfoxides and sulfones which are easily removed by conventional separation methods, in particular by extraction or adsorption. The prospects of the oxidation method are due to the possibility of practical use of sulfoxides and sulfones in various sectors of the economy. The most common oxidants in the processes of oxidative desulfurization of petroleum fractions are hydrogen peroxide and alkylhydroperoxides in combination with catalysts that provide high selectivity and speed of the process. Transition metal compounds (Mo, V, W,) are most often used as catalysts because they are able to form peroxocomplexes in the presence of peroxides. Heterogeneous catalytic systems consisting of various solid carriers (salts, oxides, activated carbon, zeolites) and peroxide oxidants (hydrogen peroxide or alkyl hydroperoxides) are actively developing. Molybdenum-containing catalysts are one of the most efficient heterogeneous systems for oxidative desulfurization of diesel fuel. There is proved the effectiveness of oxidative desulfurization, which is a combination of catalytic oxidation of sulfur-containing compounds in the presence of a heterogeneous catalyst and adsorption on activated carbon. Methods of oxidative desulfurization with their advantages and disadvantages can be logical addition to large-tonnage hydrotreating processes, and also potentially can be used as an independent method of deep purification of oil and petroleum products from sulfur-containing compounds.

Effect of Pre-oxidation on the Rate of Formation of Sulfur-Containing Aromatic Compounds during Vacuum Gas Oil Thermal Cracking

The Effect of Temperature and Oxygen Concentration on P-Xylene Oxidation

Low Temperature Oxidation of Toluene in an N-Heptane/toluene Mixture

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Effect of ambient factors over spinel CuMn2O4 for toluene catalytic ozonation: Enhancement of the synergy and the generation of ROS

The Role of Reservoir Mediums in Natural Oil Cracking: Preliminary Experimental Results in a Confined System

EFFECT OF PRE-OXIDATION ON CATALYTIC CRACKING PERFORMANCE OF COKER GAS OIL

OXIDATIVE DESULFURIZATION OF PETROLEUM PRODUCTS

Investigation of Vacuum Residue Transformation in the Presence of Dispersed and Oil-Soluble Suspended Catalysts

Catalytic Cracking Characteristics of Bio-Oil Molecular Distillation Fraction

Reaction laws of polycyclic aromatic hydrocarbons and heteroatomic compounds in hydrocracking process

The effect of mild hydrogenation on the catalytic cracking of bio-oil for aromatic hydrocarbon production

Kinetics of Oxidative Cracking of n-Hexane to Light Olefins using Lattice Oxygen of a VOx /SrO-γAl2 O3 Catalyst

Production of Aromatic Hydrocarbons by Co-Cracking of Bio-Oil and Ethanol over Ga 2 O 3 /HZSM-5 Catalysts

Effect of sensitive group-fractions on the generation of volatile products during fast thermal upgrading of Buton oil sand bitumen

Adjustment of textural and acidic properties of aluminum oxide by modifying the product of thermo-chemical activation of gibbsite with acids in hydrothermal conditions

Evolution of mass losses and evolved gases of crude oil and its SARA components during low-temperature oxidation by isothermal TG–FTIR analyses

Experimental and modeling investigation of the low-temperature oxidation of n-heptane

Study on Improving Oxidation Stability of Catalytically-Cracked Diesel Oil

An Insight into the Molecular Structure of Sulfur Compounds and Their Reactivity During Residual Oil Hydroprocessing

Mechanistic insight into heteroatom removal from vacuum gas oil blended with PMMA or PET waste