Abstract:<p>The primary objective of the present study is to investigate the variations of soot particles' oxidation reactivity along the components of the exhaust after-treatment system in a diesel engine and analyze its quantitative correlation with surface functional groups (SFGs) and graphitization degree. Soot particles generated from a 16-cylinder turbocharged diesel engine were sampled thoroughly before and after the diesel oxidation catalyst (DOC), as well as after a catalyzed diesel particulate filter (CDPF). Using a set of characterization techniques of Fourier transform infrared (FTIR), Raman spectroscopy and Thermal gravimetric analyzer (TGA), the surface functional groups (SFGs), graphitization degree and oxidation reactivity of soot particle samples along the exhaust after-treatment system components were examined. Results showed that, for all conditions, soot oxidation activation energies increased almost linearly along the after-treatment system, indicating that soot particles became more and more stable, with the inherent graphitization degree achieved the highest right after the CDPF. Meanwhile, the combined characterization results also indicated that amorphous carbon and reactive light volatile fractions have been removed or oxidized via passing through the DOC and CDPF monolith. It was thus concluded that the higher oxidation activity of soot particles was characterized by lower graphitization degree and higher aliphatic C-H group concentration. The catalyst components in the after-treatment systems (DOC and CDPF) effectively increases the graphitization of the exhaust particles, leaving more stable particles that would require much higher energies from active regeneration or more powerful catalysts on the CDPF wall surface to clean them up.</p>

Study on Improving Oxidation Stability of Catalytically-Cracked Diesel Oil

Investigation of the Physicochemical Properties of Soot Subjected to Non-Catalytic and CeO2-catalytic Aging under Sequential Aerobic and Anaerobic Exhaust-Like Conditions Simulating the Transition from Engine Operation to Cessation

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Exploratory Study on Ultrasonic Oxidation Desulfurization of Catalytic Cracking Diesel Oil

Solvent Extraction of Nitrogen Compounds from Catalytically-Cracked Diesel Oil by Metal Ion Complexation

Process of Oxidative Desulfurization of Coking Diesel

Extraction of Nitrogen Compounds from Catalytically Cracked Diesel Oil with a Volatile Carboxylic Acid Based on Reversible Chemical Complexation

Studies on Pretreatment of Catalytic Cracking Slurry Oil with Added Furfural

Study of Diesel Fuel Stability on Oxygen Absorption

Study on Physicochemical Properties of Biodiesel and Fischer–Tropsch Diesel Exhaust Particle

Study on the treatment of FCC diesel oil with metal ion complexation extraction

Cracking Performance of Gasoline and Diesel Fractions from Catalytic Pyrolysis of Heavy Gas Oil Derived from Canadian Synthetic Crude Oil

One Step Bio-Oil Upgrading through Hydrotreatment, Esterification, and Cracking

Study on Modification and Sulfur-Resistance Characteristics of Dolomite Catalysts over Wash Oil Catalytic Cracking

Review of Bio-oil Upgrading Technologies and Experimental Study on Emulsification of Bio-oil and Diesel

Study on complexation extraction of nitrogen compounds from catalytic diesel oil

Study on Preparation of Fuel Oil from Three Kinds of Molecular Sieve Catalytic Cracking Waste Lubricating Oil

Oxidation degradation analysis of antioxidant added to CTL base oils: experiments and simulations

Study on the mechanism of auto-oxidation of Jatropha biodiesel and the oxidative cleavage of C C bond

Diesel Production by Catalytic Cracking of Castor Oil Using Aluminas and Silicas

Experimental investigation of diesel soot oxidation reactivity along the exhaust after-treatment system components