Abstract:The removal of nitrogenous compounds from fuel oil is essential to reduce NOx emissions and improve the quality of the oil. In the present work, a new method of nitrogen removal using deep eutectic solvents (DESs) as extractants is reported. Seven green and low-cost quaternary ammonium acidic DESs were prepared and used for the extraction of basic N-compounds (quinoline) and non-basic N-compounds (indole) in model oil. The results indicated that the structure of DESs has a profound effect on denitrification performance. Under the same conditions, DES composed of tetrabutylammonium bromide and formic acid ([TBAB:2FA]) showed the best denitrification performance and could effectively remove both basic and non-basic nitrogen compounds. The main experimental parameters such as the mass ratio of DESs to model oil, extraction temperature, time, initial concentration of N-compounds and water content when [TBAB:2FA] were used as extractants were investigated. Under the optimal conditions (initial N-compounds concentration of 200 ppm, DESs-oil mass ratio of 1:5, 30 °C, and 60 min of extraction), the extraction efficiency of quinoline and indole were 99.60% and 98.42%, respectively. In addition, the DESs were regenerated with deionized water. When reused four times, the denitrification capacity remained high. Finally, the mechanism of the extraction process was investigated by FT-IR spectroscopy. This research is expected to provide a theoretical reference for the removal of nitrogen compounds from fuel oil.

Solvent Extraction of Nitrogen Compounds from Catalytically-Cracked Diesel Oil by Metal Ion Complexation

Extraction of Nitrogen Compounds from Catalytically Cracked Diesel Oil with a Volatile Carboxylic Acid Based on Reversible Chemical Complexation

Study on complexation extraction of nitrogen compounds from catalytic diesel oil

Study on the treatment of FCC diesel oil with metal ion complexation extraction

Study on Improving Oxidation Stability of Catalytically-Cracked Diesel Oil

Efficient removal of both basic and non-basic nitrogen compounds from fuels by deep eutectic solvents

Removal of Basic Nitrogen Compounds from the Diesel Oil by Using Ionic Liquids

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

A Study on Removing Basic Nitrogen Compounds from Diesel Oil by Ferric Chloride Complexing Agent

Green and low-cost deep eutectic solvents for efficient extraction of basic and non-basic nitrides in simulated oils

Refining of Diesel and Ship Fuels by Extraction and Combined Methods. Part 2. Use of Organic Solvents as Extractants

Study on the Removal of Naphthenic Acid from Diesel Oil by Salt under Supersonic Strengthening

Separating Group Compositions in Naphtha by Adsorption and Solvent Extraction to Improve Olefin Yields of Steam Cracking Process

Exploratory Study on Ultrasonic Oxidation Desulfurization of Catalytic Cracking Diesel Oil

Removing basic nitrogen compounds in coker gatch by solvent extraction with formic acid based on complexation

Production of Nickel 2-Ethylhexanoate – a Precursor of Cracking Catalysts of Heavy Hydrocarbon Feedstock

Solvent denitrogenating of lube base oil

Extraction of N- and S-compounds in gasoline and diesel from ionic liquids: A molecular dynamics study

Desulfurization of Fluid Catalytic Cracking Diesel Oil by Extraction with Furfuryl Alcohol

Recovery of vanadium and nickel from spent-residue oil hydrotreating catalyst by direct acid leaching-solvent extraction

Desulfurization of Fluid Catalytic Cracking Gasoline by Extraction with Acetonitrile