Abstract:Background: Ion beam therapy allows for a substantial sparing of normal tissues and higher biological efficacy. Synthetic single crystal diamond is a very good material to produce high-spatial-resolution and highly radiation hard detectors for both dosimetry and microdosimetry in ion beam therapy. Purpose: The aim of this work is the design, fabrication and test of an integrated waterproof detector based on synthetic single crystal diamond able to simultaneously perform dosimetric and microdosimetric characterization of clinical ion beams. Methods: The active elements of the integrated diamond device, that is, dosimeter and microdosimeter, were both realized in a Schottky diode configuration featured by different area, thickness, and shape by means of photolithography technologies for the selective growth of intrinsic and boron-doped CVD diamond. The cross-section of the sensitive volume of the dosimetric element is 4 mm2 and 1 μm-thick, while the microdosimetric one has an active cross-sectional area of 100 × 100 μm2 and a thickness of about 6.2 μm. The dosimetric and microdosimetric performance of the developed device was assessed at different depths in a water phantom at the MedAustron ion beam therapy facility using a monoenergetic uniformly scanned carbon ion beam of 284.7 MeV/u and proton beam of 148.7 MeV. The particle flux in the region of the microdosimeter was 6·107 cm2 /s for both irradiation fields. At each depth, dose and dose distributions in lineal energy were measured simultaneously and the dose mean lineal energy values were then calculated. Monte Carlo simulations were also carried out by using the GATE-Geant4 code to evaluate the relative dose, dose averaged linear energy transfer (LETd ), and microdosimetric spectra at various depths in water for the radiation fields used, by considering the contribution from the secondary particles generated in the ion interaction processes as well. Results: Dosimetric and microdosimetric quantities were measured by the developed prototype with relatively low noise (∼2 keV/μm). A good agreement between the measured and simulated dose profiles was found, with discrepancies in the peak to plateau ratio of about 3% and 4% for proton and carbon ion beams respectively, showing a negligible LET dependence of the dosimetric element of the device. The microdosimetric spectra were validated with Monte Carlo simulations and a good agreement between the spectra shapes and positions was found. Dose mean lineal energy values were found to be in close agreement with those reported in the literature for clinical ion beams, showing a sharp increase along the Bragg curve, being also consistent with the calculated LETd for all depths within the experimental error of 10%. Conclusions: The experimental indicate that the proposed device can allow enhanced dosimetry in particle therapy centers, where the absorbed dose measurement is implemented by the microdosimetric characterization of the radiation field, thus providing complementary results. In addition, the proposed device allows for the reduction of the experimental uncertainties associated with detector positioning and could facilitate the partial overcoming of some drawbacks related to the low sensitivity of diamond microdosimeters to low LET radiation.

Characterization of a single crystal diamond pixel detector in a high energy particle beam

Signal and noise of Diamond Pixel Detectors at High Radiation Fluences

A study of particle detectors based on single crystal diamond substrate

Mosaic diamond detectors for fast neutrons and large ionizing radiation fields

Recent Advances in Diamond Detectors

Development of the Charge Particle Detector Based on CVD - Diamond

EMPIX: A High Dynamic Range Diamond Pixel Detector for Ultra-fast Electron Diffraction and Microscopy

Single-crystal diamond grown through high-power-density epitaxy used for a high-performance radiation detector

High‐Pressure High‐Temperature Single‐Crystal Diamond Type IIa Characterization for Particle Detectors

Neutron damage of chemical vapour deposition diamond

Radiation hardness and linearity studies of CVD diamonds

Beam Test Results of the US-CMS Forward Pixel Detector

Latest results from the RD42 collaboration on the radiation tolerance of polycrystalline diamond detectors

A multi-electrode two-dimensional position sensitive diamond detector

Focused ion beam fabrication and IBIC characterization of a diamond detector with buried electrodes

4H-Silicon Carbide as particle detector for high-intensity ion beams

A study of the radiation tolerance of poly-crystalline and single-crystalline CVD diamond to 800 MeV and 24 GeV protons

Diamond based integrated detection system for dosimetric and microdosimetric characterization of radiotherapy ion beams

Development of the Beam Conditions Monitoring Prime system for beam abort and luminosity monitoring in ATLAS based on a segmented polycrystalline CVD diamond system and dedicated front-end ASIC

Diamond Detectors for UV and X-Ray Source Imaging

Nanodiamond photocathodes for MPGD-based single photon detectors at future EIC