Abstract:Several "Beyond Li-Ion Battery" concepts such as all solid-state batteries and hybrid liquid/solid systems envision the use of a solid electrolyte to protect Li-metal anodes. These configurations are very attractive due to the possibility of exceptionally high energy densities and high (dis)charge rates, but they are far from being realized practically due to a number of issues including high interfacial resistance and difficulties associated with fabrication. One of the most promising solid electrolyte systems for these applications is Al or Ga stabilized Li7La3Zr2O12 (LLZO) based on high ionic conductivities and apparent stability against reduction by Li metal. Nevertheless, the fabrication of dense LLZO membranes with high ionic conductivity and low interfacial resistances remains challenging; it definitely requires a better understanding of the structural and electrochemical properties. In this study, the phase transition from garnet (Ia3̅d, No. 230) to "non-garnet" (I4̅3d, No. 220) space group as a function of composition and the different sintering behavior of Ga and Al stabilized LLZO are identified as important factors in determining the electrochemical properties. The phase transition was located at an Al:Ga substitution ratio of 0.05:0.15 and is accompanied by a significant lowering of the activation energy for Li-ion transport to 0.26 eV. The phase transition combined with microstructural changes concomitant with an increase of the Ga/Al ratio continuously improves the Li-ion conductivity from 2.6 × 10-4 S cm-1 to 1.2 × 10-3 S cm-1, which is close to the calculated maximum for garnet-type materials. The increase in Ga content is also associated with better densification and smaller grains and is accompanied by a change in the area specific resistance (ASR) from 78 to 24 Ω cm2, the lowest reported value for LLZO so far. These results illustrate that understanding the structure-properties relationships in this class of materials allows practical obstacles to its utilization to be readily overcome.

Potential Solid-State Electrolytes with Good Balance between Ionic Conductivity and Electrochemical Stability: Li 5– x M 1– x M x ′O 4 (M = Al and Ga and M′ = Si and Ge)

Potential Solid-State Electrolytes with Good Balance Between Ionic Conductivity and Electrochemical Stability: Li5-xM1-xMx'O4 (M = Al and Ga and M' = Si and Ge).

Ionic Liquid Reinforced NaSICON-type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Li-ion transport in solid-state electrolyte of Li1–xAl1–xSi2+xO6: an ab initio study

High Li+ Conductivity of Li1.3+xAl0.3−xMgxTi1.7(PO4)3 with Hybrid Solid Electrolytes for Solid‐State Lithium Batteries

Thio‐/LISICON and LGPS‐Type Solid Electrolytes for All‐Solid‐State Lithium‐Ion Batteries

Motif-Based Exploration of Halide Classes of Li5M10.5M20.5X8 Conductors Using the DFT Method: Toward High Li-Ion Conductivity and Improved Stability

Garnet-type Solid-state Electrolyte Li7La3Zr2O12: Crystal Structure, Element Doping and Interface Strategies for Solid-state Lithium Batteries

Ga-doped lithium lanthanum zirconium oxide electrolyte for solid-state Li batteries

An Air‐Stable and Li‐Metal‐Compatible Glass‐Ceramic Electrolyte enabling High‐Performance All‐Solid‐State Li Metal Batteries

Predicting Li-Rich Layered Oxide Compounds as High-Conductivity and Stable Solid Electrolytes

Li4-xGe1-xPxO4 a potential solid-state electrolyte for all-oxide microbatteries

Melt-casted Li1.5Al0.3Mg0.1Ge1.6(PO4)3 glass ceramic electrolytes: A comparative study on the effect of different oxide doping

Li-Ion Cooperative Migration and Oxy-Sulfide Synergistic Effect in Li14 P2 Ge2 S16-6 x Ox Solid-State-Electrolyte Enables Extraordinary Conductivity and High Stability

A High-Entropy Multicationic Substituted Lithium Argyrodite Superionic Solid Electrolyte

Structural and Electrochemical Consequences of Al and Ga Cosubstitution in Li7La3Zr2O12 Solid Electrolytes

Lithium-rich diamond-like solid electrolytes for lithium batteries

Achieving Both High Ionic Conductivity and High Interfacial Stability with the Li2+xC1-xBxO3 Solid-State Electrolyte: Design from Theoretical Calculations

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Insights into the Electrochemical Stability and Lithium Conductivity of Li4MS4 (M = Si, Ge, and Sn).