Abstract:The low sample-to-sample reproducibility of laser induced breakdown spectroscopy (LIBS) is the most critical obstacle to wide commercialization of the technology. Averaging multi-pulse normalized spectra is the only applied method to improve the sample-to-sample reproducibility; however, the method can only improve the reproducibility to some extent because the averaging process can only eliminate random noise and has no effect on non-random noise, and because normalization can only partially and indirectly remove the signal fluctuations. In addition, the measurement accuracy of LIBS is also limited due to matrix effects as well as signal uncertainty. In this work, we propose a set method to improve both precision (sample-to-sample reproducibility) and accuracy for LIBS quantification. The method includes three steps: (1) the intensities of all spectral lines from every single pulse are converted to a standard state value using a "spectrum standardization" method to reduce the measurement uncertainties to acceptable levels; (2) the standardized spectra are compared with a large spectral database to check whether the current sample is a new sample or is already in the database with known composition/property information; and (3) if the sample is found to be a new sample, a dominant factor based partial least square (PLS) model is applied to provide quantitative analytical results, and the new standardized spectral information and analytical results are inserted into the spectrum database, making the database self-adaptable for future measurements; while if the sample is found to be already in the database, the analytical results are directly obtained from the database. The proposed method was applied for coal analysis. The results showed that the relative standard deviation (RSD) of carbon for different measurements of the same sample is 0.3%, proving that LIBS is able to provide high reproducibility, at least for coal analysis applications. The average measurement errors for carbon, hydrogen, volatiles, ash and heat values are 0.42%, 0.05%, 0.07%, 0.17% and 0.07 MJ kg(-1), respectively, and all of these measurement accuracies fully meet the requirements of the national standard for coal analyses using traditional chemical processing methods. This is the first quantitative application of LIBS with real industrial requirements, and the present work proves the feasibility of LIBS for accurate quantification from a technical point of view.

Rapidly Measuring Unburned Carbon in Fly Ash Using Molecular Cn by Laser-Induced Breakdown Spectroscopy

Development of a Rapid Coal Analyzer Using Laser-Induced Breakdown Spectroscopy (LIBS)

Elemental and proximate analysis of coal by x-ray fluorescence assisted laser-induced breakdown spectroscopy

[Influence of Flame Emission Spectroscopy on K measurement Using Laser Induced Breakdown Spectroscopy]

Real-time determination of combustion degree by laser-induced breakdown spectroscopy

A New Route for Unburned Carbon Concentration Measurements Eliminating Mineral Content and Coal Rank Effects

Fast measurement of coking properties of coal using laser induced breakdown spectroscopy

Developing a compact coal quality rapid detection integrated machine based on laser‐induced breakdown spectroscopy

Research on On-Site Measurement Factors and Performance of Coal Calorific Value Based on Laser Ignition

Quantitative Carbon Analysis in Coal by Combining Data Processing and Spatial Confinement in Laser-Induced Breakdown Spectroscopy

System Error Present When Measuring the Carbon Content of the Fly-ash of a Circulating Fluidized Bed Boiler by Using a Loss-on-ignition Method

Application of a Spectrum Standardization Method for Carbon Analysis in Coal Using Laser-Induced Breakdown Spectroscopy (LIBS)

Analysis of Pulverized Coal by Laser-Induced Breakdown Spectroscopy

Structural evolution of solid-fuel combustion using laser-induced breakdown spectroscopy and Raman spectroscopy

A hybrid quantification model and its application for coal analysis using laser induced breakdown spectroscopy

Dynamic behaviors of the sodium, calcium and iron release during coal combustion using multi-point LIBS

The application of spectrum standardization method for carbon analysis in coal using laser-induced breakdown spectroscopy

Development and Commercial Evaluation of Laser-Induced Breakdown Spectroscopy Chemical Analysis Technology in the Coal Power Generation Industry

In-Situ Measurement of Sodium and Potassium Release During Oxy-Fuel Combustion of Lignite Using Laser-Induced Breakdown Spectroscopy: Effects of O-2 and Co2 Concentration

Detection of Organic Carbon in Shale by Laser Induced Breakdown Spectroscopy and Raman Spectroscopy Combined with Partial Least Squares Methods

Coal Property Analysis Using Laser-Induced Breakdown Spectroscopy