Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

An SOC estimation method based on sliding mode observer and the Nernst Equation

Electrochemical Model Based State of Charge Estimation for Lithium Batteries with Backstepping Techniques

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

An Equivalent Siding Mode Observer for Electric Vehicle Lithium Battery SOC Estimation

A Novel Battery State of Charge Estimation Method Based on a Super-Twisting Sliding Mode Observer

A Modified Luenberger Observer For Soc Estimation Of Lithium-Ion Battery

An Adaptive Sliding Mode Observer for Lithium-Ion Battery State of Charge and State of Health Estimation in Electric Vehicles

Estimation of SOC/SOH for 18650-type lithium battery based on sliding-mode adaptive algorithm

State of charge estimation for liquid metal battery based on an improved sliding mode observer

A Novel Method for State of Charge Estimation of Lithium-Ion Batteries Using A Nonlinear Observer

Observer based battery SOC estimation: Using multi-gain-switching approach

Neural Network-Based State of Charge Observer Design for Lithium-Ion Batteries

State of charge estimation of lithium-ion batteries using fractional order sliding mode observer

A Method for State-Of-Charge Estimation of Lifepo4 Batteries Based on A Dual-Circuit State Observer

A State of Charge Estimation Method Based on $h_\infty$ Observer for Switched Systems of Lithium-Ion Nickel–Manganese–Cobalt Batteries

A Novel Observer for Lithium-Ion Battery State of Charge Estimation in Electric Vehicles Based on A Second-Order Equivalent Circuit Model

State of Charge Estimation for Power Lithium-Ion Battery Using a Fuzzy Logic Sliding Mode Observer

An Adaptive Observer-Based SOC Estimation Method for Lithium-Ion Batteries Against Sensor Measurement Uncertainties

A Fast Lithium-Ion Battery Impedance and SOC Estimation Method Based on Two-Stage PI Observer

Sliding Mode Observer for State-of-Charge Estimation Using Hysteresis-Based Li-Ion Battery Model