Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

A Method for State-Of-Charge Estimation of Lifepo4 Batteries Based on A Dual-Circuit State Observer

Electrochemical Model Based State of Charge Estimation for Lithium Batteries with Backstepping Techniques

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

Online Parameter Identification and Joint Estimation of the State of Charge and the State of Health of Lithium-Ion Batteries Considering the Degree of Polarization

Observer based battery SOC estimation: Using multi-gain-switching approach

A Novel Method for State of Charge Estimation of Lithium-Ion Batteries Using A Nonlinear Observer

A Fast Lithium-Ion Battery Impedance and SOC Estimation Method Based on Two-Stage PI Observer

A comparative study of state of charge estimation algorithms for LiFePO4 batteries used in electric vehicles

A Modified Luenberger Observer For Soc Estimation Of Lithium-Ion Battery

Nonlinear Observer Design for the State of Charge of Lithium-Ion Batteries

A State of Charge Estimation Method Based on $h_\infty$ Observer for Switched Systems of Lithium-Ion Nickel–Manganese–Cobalt Batteries

State Of Charge Estimation Of Lifepo4 Battery Based On A Gain-Classifier Observer

State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer

Adaptive Parameter Identification And State-Of-Charge Estimation Of Lithium-Ion Batteries

A Novel Observer for Lithium-Ion Battery State of Charge Estimation in Electric Vehicles Based on A Second-Order Equivalent Circuit Model

State of charge estimation for LiFePO4 battery via dual extended kalman filter and charging voltage curve

A State of Charge Estimation Method of Lithium-Ion Battery Based on Fused Open Circuit Voltage Curve

Neural Network-Based State of Charge Observer Design for Lithium-Ion Batteries

A Li-Ion Battery State of Charge Estimation Strategy Based on the Suboptimal Multiple Fading Factor Extended Kalman Filter Algorithm

A New Model for State-Of-Charge (soc) Estimation for High-Power Li-Ion Batteries