Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

A Modified Luenberger Observer For Soc Estimation Of Lithium-Ion Battery

Electrochemical Model Based State of Charge Estimation for Lithium Batteries with Backstepping Techniques

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

A Novel Method for State of Charge Estimation of Lithium-Ion Batteries Using A Nonlinear Observer

Nonlinear Observer Design for the State of Charge of Lithium-Ion Batteries

Estimation of SOC/SOH for 18650-type lithium battery based on sliding-mode adaptive algorithm

A State of Charge Estimation Method Based on $h_\infty$ Observer for Switched Systems of Lithium-Ion Nickel–Manganese–Cobalt Batteries

An Adaptive Observer-Based SOC Estimation Method for Lithium-Ion Batteries Against Sensor Measurement Uncertainties

State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer

Neural Network-Based State of Charge Observer Design for Lithium-Ion Batteries

A Fast Lithium-Ion Battery Impedance and SOC Estimation Method Based on Two-Stage PI Observer

State-of-Charge Estimation for Lithium-Ion Batteries Based on a Nonlinear Fractional Model

Error Analysis of the Model-Based State-of-Charge Observer for Lithium-Ion Batteries

A Novel Observer for Lithium-Ion Battery State of Charge Estimation in Electric Vehicles Based on A Second-Order Equivalent Circuit Model

State-of-Charge Observer Design for Batteries with Online Model Parameter Identification: A Robust Approach

An Adaptive Sliding Mode Observer for Lithium-Ion Battery State of Charge and State of Health Estimation in Electric Vehicles

Observer based battery SOC estimation: Using multi-gain-switching approach

A Nonlinear Observer SOC Estimation Method Based on Electrochemical Model for Lithium-Ion Battery

SOC Estimation of Lithium-Ion Battery Based on Equivalent Circuit Model with Variable Parameters

A Method for State-Of-Charge Estimation of Lifepo4 Batteries Based on A Dual-Circuit State Observer

State of Charge Estimation of Lithium-Ion Batteries Using an Optimal Adaptive Gain Nonlinear Observer