Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

Nanoparticle Capture During Directional Solidification of Nano-Sized SiC Particle-Reinforced AZ91D Composites

Directional Solidification of Nano-Sized SiC Particles Reinforced AZ91D Composites

Silicon Carbide Particle Formation/engulfment During Directional Solidification of Silicon

Engulfment and distribution of second-phase nanoparticle during dendrite solidification of an Al–Si binary alloy: a simulation study

Microstructure Evolution During Directional Solidification of 2009al/sicp at Different Pulling Velocities: Modeling and Experiment

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Influence of Nickel Precipitation on the Formation of Denuded Zone in Czochralski Silicon

Effect of SiC Particles and the Particulate Size on the Hot Deformation and Processing Map of AZ91 Magnesium Matrix Composites

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

Nano-Phase and SiC–Si Spherical Microstructure in SiC/Al-50Si Composites Solidified under High Pressure

Modeling the Filler Phase Interaction with Solidification Front in Al(TiC) Composite Produced by the In Situ Method

Mechanism and modeling of silicon carbide formation and engulfment in industrial silicon directional solidification growth

Influence of Sic Nanoparticles Addition on the Microstructural Evolution and Mechanical Properties of Az91 Alloy During Isothermal Multidirectional Forging

Interfacial Reaction in Squeeze Cast SiC W /AZ91 Composites with Different Binders

Directional solidification of Al/C composites

In situ analysis of solute and flow fields in directional solidification of immiscible Al–Bi alloy

Tribological behavior of SiC reinforced AZ91D composites manufactured by semisolid injection molding

Numerical Simulation of Microstructure of Al-Si/Sicp Composites During Stir Casting Process with Particle Pushing Model

Hidden State of Si 50 Ge 50 Nanoparticles During Rapid Solidification

Effect of Ultrasonic Vibration on the Grain Refinement and SiC Particle Distribution in Zn-based Composite Filler Metal