Abstract:Surface modification of hexagonal boron nitride and construction of 3D thermal conductivity network and preparation of epoxy resin matrix composites. This paper investigates the high thermal conductive properties of modified hexagonal boron nitride (h‐BN)/epoxy (EP) composites. Octadecyl trimethyl ammonium bromide as a cationic surfactant modified h‐BN and sodium carboxymethylcellulose to build 3D heat transfer framework by the ice template method and preparation of epoxy composites. The h‐BN was modified by inter‐ionic charge electrostatic attraction to improve the h‐BN dispersibility; characterization by scanning electron microscope, transmission electron microscope, zeta potential, x‐ray diffraction and Fourier transform infrared spectroscopy proved the success of h‐BN surficial modifyment. 3 wt% sodium carboxymethylcellulose was used to construct the optimal 3D modified h‐BN network, and the w‐BN/EP composites had a very high heat conduction; when the composite material acquired by the ice template method have high heat transfer coefficient, 1.57 W/(m K) for 25 wt% 3D modified h‐BN/EP heat transfer coefficient and 0.76 W/(m K) for modified h‐BN/EP at the same ratio, which is a 107% enhancement in heat transfer efficiency, and 0.12 W/(m K) for EP, which is a 1208% enhancement in thermal conductivity. The results of thermogravimetric analysis (thermogravimetric analysis and differential thermogravimetric analysis), differential scanning calorimetry, and infrared thermography indicate that the thermostability and rejection of heat of composite material was significantly improved. The variation of dielectric constant was stabilized to ensure lower dielectric loss. Overall, this study can better adapt to high‐frequency signal transmission. Highlights Use octadecyl trimethyl ammonium bromide to modify the interface of hexagonal boron nitride (h‐BN) enhances the dispersibility and reduces the inter‐facial heat resistance with epoxy resin through inter‐ionic electrostatic attraction. The optimal content of sodium carboxymethyl cellulose was selected to construct a 3D mesh framework with the modified h‐BN to ensure the formation of a continuous and homogeneous network at the maximum porosity. The 3D modified h‐BN network was prepared by the ice template method to reinforce the heat conductivity of the composite materials.

Sugar‐template method to construct a boron nitride filler network to enhance the thermal conductivity of epoxy composites

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

An Efficient Approach for Constructing 3-D Boron Nitride Networks with Epoxy Composites to Form Materials with Enhanced Thermal, Dielectric, and Mechanical Properties

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

Polyurethane-templated 3D BN network for enhanced thermally conductive property of epoxy composites

Study on the Construction of 3D-BN Network in Epoxy Resin by Introducing Foam Skeleton

Constructing three‐dimensional boron nitride network for highly thermally conductive epoxy resin composites

Preparation of a 3D BN network structure by a salt‐template‐assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Thermal and Electrical Properties of Epoxy Composites Filled with 3D h‐BN/TOCNF Fillers

High Thermal Conductivity in Three-Dimensional BN/epoxy Composites by Engineered Favorable Interfacial Adhesion Between BN Sheets

Improved thermal conductivity of epoxy composites filled with three-dimensional boron nitride ceramics-carbon hybrids

Construction of 3D modified hexagonal boron nitride thermal conductivity network by ice template method and research of high heat‐conducting coefficient of epoxy resin matrix composite material

Construction of three-dimensional interconnected boron nitride/sliver networks within epoxy composites for enhanced thermal conductivity

Enhance the thermal conductivity and maintain insulation property of epoxy via constructing a three-dimensional network by doping hexagonal boron nitride and carbon nanofiber

Highly thermally conductive electrically insulating composites composed of core–shell structure fiber boron nitride@titanium dioxide filler

Boron nitride-graphene sponge as skeleton filled with epoxy resin for enhancing thermal conductivity and electrical insulation

High thermal conductivity of epoxy composites via micro-zone enhanced 3D interconnected nickel skeleton

Thermal Conductivity of Epoxy Composites Containing 3D Honeycomb Boron Nitride Filler

Synchronously enhancing thermal conductivity and dielectric properties in epoxy composites via incorporation of functionalized boron nitride

Enhanced Thermal Conductivity and Ideal Dielectric Properties of Epoxy Composites Containing Polymer Modified Hexagonal Boron Nitride