Stable High Temperature Operation of p-GaN Gate HEMT With Etch-Stop Layer

Hanwool Lee,Hojoon Ryu,Junzhe Kang,Wenjuan Zhu

DOI: https://doi.org/10.1109/led.2024.3352046

IF: 4.8157

2024-03-02

IEEE Electron Device Letters

Abstract:High-temperature operation of the p-GaN gate high-electron-mobility transistor (HEMT) was investigated, specifically up to 500 °C. The p-GaN gate HEMT demonstrated stable behavior with normally-off operation, steep increase of drain current in the subthreshold region, and suppressed off-state current. By adding Al2O3 etch-stop layer, the device showed significant reduction in subthreshold swing when measured at 500 °C, effectively mitigating hysteresis in the transfer characteristics. Additionally, the lifetime of the gate stack with the etch-stop layer was estimated to be much longer than that of the stack without the etch-stop layer. Through the integration of the depletion-mode (D-mode) metal-insulator-semiconductor HEMT (MIS-HEMT) device with the p-GaN gate device, a direct-coupled field-effect transistor logic (DCFL) inverter was fabricated. This inverter showed stable logic operation up to 500 °C, featuring rail-to-rail operation and large gain. A long-term reliability test conducted at 500 °C for 100 hours revealed stabilized on-state and off-state values after about 50 hours of operation.

engineering, electrical & electronic