Abstract:Although the time-to-digital converters (TDCs) implemented on field programmable gate arrays (FPGAs) have achieved considerably high measurement resolution and precision in recent years, achieving zero measurement dead time is still a challenge for some applications. The goal of this paper is to design a FPGA-based TDC with zero measurement dead time without compromising other performance. Based on the conventional tapped delay line (TDL) TDC structure, the idea of our method is to enable the continuous flow of trigger signals onto the TDL and propose a powerful encoder with capability of recognizing all trigger edges within a system clock period. Considering the inherent “bubble” problem in the TDL, the latched TDL status is first decomposed into sixteen divisions, all of which identify all the trigger edges in parallel. Through a specific coincident mechanism, the trigger edges on all the divisions are matched and their positions on the TDL are encoded for output. To overcome the significant integral nonlinearity (INL) error caused by large delay deviations of delay units, online calibration tables are established to convert the positions of trigger edges into fine timestamps, so that the original resolution and precision of the TDC can be maintained. The proposed TDC is implemented on a Xilinx Zynq UltraScale+ FPGA for performance evaluation. In addition to verifying the TDC function and online calibration tables, the TDC resolutions for the rising and falling edges are measured as 1.82 ps and 1.92 ps respectively. By inputting the trigger signals with a higher frequency than the TDC system clock, all the rising and falling edges of trigger signals are detected with the root mean square (RMS) measurement precisions ranging from 2 ps to 4.5 ps, which confirms the achievement of zero measurement dead time.

Improving the Accuracy of Time-Difference Measurement by Reducing the Impact of Baseline Shift

Design of a High-Accuracy Time-to-digital Converter Based on Dual-Edge Signals

Time to digital method with good precision, linearity and temperature stability

Robust Precise Time Difference Estimation Based on Digital Zero-Crossing Detection Algorithm

High-Precision Time Interval Measurement Method Based on Sliding Scaled Time-to-Digital Conversion Circuit

A New Multilevel Interpolated TDC Method Based on a Two-Step Synchronizer

An FPGA-Based High Precision Pulse Width Measurement Time-to-Digital Converter with Dual-TDL Multiplexer Encoder

Cross-Detection and Dual-Side Monitoring Schemes for FPGA-Based High-Accuracy and High-Precision Time-to-Digital Converters

A relative frequency difference detection method based on TDC

Design of Time-to-Digital Converters for Time-Over-Threshold Measurement in Picosecond Timing Detectors

Threshold Optimization In Multi-Voltage Threshold Digitizers For Tof Pet Detector

A Hybrid Time-to-digital Converter Based on Residual Time Extraction and Amplification.

A Nonlinearity Minimization-Oriented Resource-Saving Time-to-Digital Converter Implemented in a 28 Nm Xilinx FPGA

Implementation of A High-Precision and Wide-Range Time-To-Digital Converter with Three-Level Conversion Scheme

A high precision TDC based on a multi-phase clock

Realization of Zero Measurement Dead Time on FPGA-based Time-to-Digital Converters

A New Solution of Time Synchronization in All-Digital Pet Based on Tdc

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Signal Processing to Reduce Dark Noise Impact in Precision Timing

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A Wide-Voltage-Range Half-Path Timing Error-Detection System with a 9-Transistor Transition-Detector in 40-Nm CMOS