Abstract:The particle-in-cell (PIC) simulation of an A6 magnetron with diffraction output (MDO) in our earlier work shows the peak output power (especially the short power pulse with several nanoseconds duration) is lowered when electrons with high energy strike the anode block, which leads to the emission of secondary and backscattered electrons. In addition, the PIC simulation for a 12-cavity MDO also shows when secondary electron emission occurs, the boundary for neighboring modes becomes more complicated than before. Replacing tapered cavities by single-stepped cavities in a relativistic MDO increases the interaction space where the charged particles interact with the induced RF waves. The electronic efficiency of the A6 relativistic MDO as well as the 12-cavity MDO with single-stepped cavities driven by the transparent cathode can be over 70% with gigawatts output power level. And with single-stepped cavities, the distance between the cathode and the wall of relativistic MDO is increased such that the possibility for electrons with high energy striking on the wall is decreased, which results in less emission of secondary and backscattered electrons under the same applied voltage. The PIC simulation demonstrated that in the 12-cavity MDO with single-stepped cavities driven by the transparent cathode with 400-kV applied voltage, the electrons with above 500 eV from cathode under the crossed electromagnetic field can strike on the anode block of MDO, resulting in a secondary and backscattered electron current that can cause different modes to be prevalent or stop the designed mechanism from working. Especially when applied with short voltage pulse with 10-ns duration, the output power pulse is shorted with peak power lowered. The simulation results presented in this paper possibly provide references for multicavity resonator when considering mode selection or mode switching experiments.

Experimental Study and Electromagnetic Model of a 1-MV Induction Voltage Cavity

Test of a single stage 1-MV prototype induction voltage cavity

Closed-Double-Magnetic Circuit for A Long-Stroke Horizontal Electromagnetic Vibration Exciter

Spatially Asymmetric Distribution and Related Influence Factors of Injected Currents in Magnetically-Insulated Induction Voltage Adders

Theoretical Model and Numerical Analysis of Nonaxisymmetrical Magnetic Insulation in the Secondary Side of Induction Voltage Adders

Theoretical Model and Particle-in-Cell Simulation of Vacuum Magnetically Insulated Electron Flow With Off-Centered Cross Section

Circuit Model of Magnetically-Insulated Induction Voltage Adders Based on the Transmission Line Code

Cavity model method based with gradient current distribution along the via for power integrity simulation

Simulation, Experiment, and Performance of a 4 MV Induction Voltage Adder Machine for Flash X-Ray Radiography

Modeling A 3.5 Mev Induction Voltage Adder

High-Current Vacuum Arc Under Axial Magnetic Field: Numerical Simulation And Comparisons With Experiments

Numerical Simulation of Azimuthal Uniformity of Injection Currents in Single-Point-Feed Induction Voltage Adders

Self-modulation of Intense Relativistic Annular Electron Beam in Equipotential Resonant Cavity

MUD simulation of high-current vacuum arc under different axial magnetic fields

Numerical Simulation Of High-Current Vacuum Arcs Under Axial Magnetic Fields With Consideration Of Current Density Distribution At Cathode

Investigation Of Breakdown Induced Surface Damage On 805 Mhz Pillbox Cavity Interior Surfaces

Travel Wave Analysis and Simulation of Induction Voltage Adder

Operation Characteristics of a 12-Cavity Relativistic Magnetron when Considering Secondary and Backscattered Electrons’ Emission

Circuit Simulation of Current Loss in Magnetically Insulated Transmission Line System in 15- MA Z-pinch Driver

Theoretical and Practical Study on RF Model Cavity of 100mev H-Cyclotron

Study of a MA-loaded cavity for compact synchrotron