Abstract:Microbial community changes in response to acid stress in microbial fuel cells (MFCs) were studied. Acid mine drainage (AMD) wastewater is usually difficult to treat because of the high concentration of sulfate and heavy metals. MFCs, which have multiple functions based on the principle of synergistically treating organic and heavy metal wastewater while generating electrical energy, represent a promising direction for the development of new heavy metal wastewater treatment technologies. Maintaining a neutral or slightly alkaline wastewater pH in MFCs facilitates the growth of electricity-producing microorganisms in the anode chamber. Studies on the response of anode electroactive biofilms to acidic pH stress and its correlation with changes in AMD treatment capacity have not been reported. Results showed that the anolyte pH of 4.0 and 5.0 affected the electron output capacity of the electrogenic microbial community in the MFCs. In contrast, MFCs working at an anolyte pH of 6.0 exhibited a high efficiency of chemical energy conversion to electrical energy. The microbial abundance and microbial diversity of the electroactive biofilm were significantly affected by the H+ concentration in the medium when the ambient acidity was continuously reduced. The classic exoelectrogen Geobacter decreased gradually with the increase of H+ concentration in the medium. In addition, Cu2+ was recovered from the simulated AMD in the MFCs cathodic chambers at low anode pH, but the removal rate of Cu2+ decreased as the pH of the anode environment decreased. At 48 h, 86.2% of Cu2+ was removed from the MFCs cathode solution at pH 5.0, while the removal rate of Cu2+ from the MFCs cathode solution at pH 4.0 was 84.2%. Trace amounts of Cu2O and Cu-3(OH)(2)[CO3](2) were present on the cathode, which reduced the amount of Cu2+ that precipitated on the cathode carbon cloth. Conversely, the concentration of Cu2+ in the catholyte of MFCs with electroactive biofilm at pH 6.0 decreased rapidly, and by 36 h, no detectable Cu2+ was present in the cathodic solution. This study will provide researchers with valuable information regarding the optimal pH for resource recovery with MFCs.

Enhancing the response of microbial fuel cell based toxicity sensors to Cu(II) with the applying of flow-through electrodes and controlled anode potentials

Enhanced Detection of Toxicity in Wastewater Using a 2D Smooth Anode Based Microbial Fuel Cell Toxicity Sensor

Enhanced Quorum Sensing of Anode Biofilm for Better Sensing Linearity and Recovery Capability of Microbial Fuel Cell Toxicity Sensor.

The Evaluation of Long Term Performance of Microbial Fuel Cell Based Pb Toxicity Shock Sensor.

Sequential flowing membrane-less microbial fuel cell using bioanode and biocathode as sensing elements for toxicity monitoring

Effect of Cuo/Zno/Fto Electrode Properties on the Performance of a Photo-Assisted Microbial Fuel Cell Sensor for the Detection of Heavy Metals

A Novel Microbial Fuel Cell Sensor with Biocathode Sensing Element.

Low Temperature Acclimation of Electroactive Microorganisms May Be an Effective Strategy to Enhance the Toxicity Sensing Performance of Microbial Fuel Cell Sensors

Different responses of toxic substances in microbial fuel cells

Effect of electrode types on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell (vol 134, pg 20, 2014)

Visual detection of the toxicity of wastewater containing heavy metal ions using a microbial fuel cell biosensor with a Prussian blue cathode

Effect of CuO/ZnO/FTO electrode properties on the performance of a photo-microbial fuel cell sensor for the detection of heavy metals

The Effect of Anode Hydrodynamics on the Sensitivity of Microbial Fuel Cell Based Biosensors and the Biological Mechanism.

[Detection of toxic substances in microbial fuel cells]

Effect of Cu2+on the Electricity Generation and Its Transformation Process in Anode of Microbial Fuel Cells

Microbial Fuels Cell-Based Biosensor For Toxicity Detection: A Review

An innovative fast-start aerobic anode microbial fuel cell biosensor for copper ion detection

Electrochemical Responses and Microbial Community Shift of Electroactive Biofilm to Acidity Stress in Microbial Fuel Cells

A Double-microbial Fuel Cell Heavy Metals Toxicity Sensor

Enhancement of the sensitivity of a microbial fuel cell sensor by transient-state operation

Enhancing Signal Output and Avoiding BOD/Toxicity Combined Shock Interference by Operating a Microbial Fuel Cell Sensor with an Optimized Background Concentration of Organic Matter