Abstract:Single cell trapping increasingly serves as a key manipulation technique in single cell analysis for many cutting-edge cell studies. Due to their inherent advantages, microfluidic devices have been widely used to enable single cell immobilization. To further improve the single cell trapping efficiency, this paper reports on a passive hydrodynamic microfluidic device based on the "least flow resistance path" principle with geometry optimized in line with corresponding cell types. Different from serpentine structure, the core trapping structure of the micro-device consists of a series of concatenated T and inverse T junction pairs which function as bypassing channels and trapping constrictions. This new device enhances the single cell trapping efficiency from three aspects: (1) there is no need to deploy very long or complicated channels to adjust flow resistance, thus saving space for each trapping unit; (2) the trapping works in a "deterministic" manner, thus saving a great deal of cell samples; and (3) the compact configuration allows shorter flowing path of cells in multiple channels, thus increasing the speed and throughput of cell trapping. The mathematical model of the design was proposed and optimization of associated key geometric parameters was conducted based on computational fluid dynamics (CFD) simulation. As a proof demonstration, two types of PDMS microfluidic devices were fabricated to trap HeLa and HEK-293T cells with relatively significant differences in cell sizes. Experimental results showed 100% cell trapping and 90% single cell trapping over 4 x 100 trap sites for these two cell types, respectively. The space saving is estimated to be 2-fold and the cell trapping speed enhancement to be 3-fold compared to previously reported devices. This device can be used for trapping various types of cells and expanded to trap cells in the order of tens of thousands on 1-cm(2) scale area, as a promising tool to pattern large-scale single cells on specific substrates and facilitate on-chip cellular assay at the single cell level. (C) 2015 AIP Publishing LLC.

A Mechanically Tunable Microfluidic Cell-Trapping Device.

Design of Acoustofluidic Device for Localized Trapping

A microfluidic device enabling high-efficiency single cell trapping.

A Microfluidic Device Enabling Deterministic Single Cell Trapping and Release.

Flexible Trapping and Manipulation of Single Cells on a Chip by Modulating Phases and Amplitudes of Electrical Signals Applied Onto Microelectrodes.

A Novel and Robust Single-cell Trapping Method on Digital Microfluidics

Study of a Microfluidic Chip Integrating Single Cell Trap and 3D Stable Rotation Manipulation.

Enhanced cell sorting and manipulation with combined optical tweezer and microfluidic chip technologies.

An Agar Gel Membrane-Pdms Hybrid Microfluidic Device for Long Term Single Cell Dynamic Study

Numerical Modeling of Physical Cell Trapping in Microfluidic Chips

High‐Efficient Microfluidic Single‐Cell Trapping and Arraying with Absolute Sequential Capture and High Success Rate of Perfect Capture

Time Sequential Single-Cell Patterning with High Efficiency and High Density.

Microfluidic Technology for Single-Cell Manipulation

High-Throughput, Deterministic Single Cell Trapping and Long-Term Clonal Cell Culture in Microfluidic Devices

Compound Manipulation of Micro-Particles Using a Single Device:Ultrasonic Trapping, Transporting, and Rotating

High-Throughput Cell Trapping in the Dentate Spiral Microfluidic Channel

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Continuous Trapping, Elasticity Measuring and Deterministic Printing of Single Cells Using Arrayed Microfluidic Traps.

Integrated Cell Manipulation Systems

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

Tunable Microfluidic Device Fabricated by Femtosecond Structured Light for Particle and Cell Manipulation