Abstract:ZnS is a promising sorbent in recovering Hg0 from industrial flue gas due to its excellent Hg0 adsorption capacity. However, the internal structure–activity relationship still needs to be further clarified. In this work, ZnS sorbents with different structures were synthesized with the hydrothermal method by tuning the temperature. The samples had significant differences in the crystallinity, morphology, particle size, and sulfur (S) active sites. The results indicated that Hg0 removal performance was determined by the specific surface area and S active sites. ZnS synthesized at low temperatures (80-ZnS and 120-ZnS) had a larger surface area, while the S sites on the high-temperature-synthesized sample (160-ZnS) were more active for Hg0 adsorption. The 160-ZnS sample exhibited a much higher Hg0 adsorption amount per unit surface area. Further characterization revealed that S22– and Sx were the main active sites for Hg0 adsorption. Sx existed in the form of long-chain polysulfur (L-Sx) on 80-ZnS and 120-ZnS, while it exhibited in the form of short-chain polysulfur (S-Sx) on 160-ZnS. L-Sx had negligible adsorption ability, while S-Sx had a high affinity for Hg0. Hg0 can react with S22– and S-Sx, forming α-HgS and β-HgS, respectively. The new insight in this work can provide theoretical guidance for the design and structure optimization of ZnS, facilitating its practical industrial application.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c05878?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c05878</a>.Additional experimental data of sample characterization (Figures S1, S3, and S4); schematic diagram of the fixed-bed experimental system (Figure S2); breakthrough profile of 80-ZnS for long-time adsorption (Figure S5); influence of flue gas components on 80-ZnS (Figure S6); Hg-TPD peak fitting (Figure S7); comparison of 80-ZnS with other adsorbents for Hg0 capture (Table S1); summary of the active sites and corresponding products from the references (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c05878/suppl_file/es0c05878_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultraeffective ZnS nanocrystals sorbent for mercury(II) removal based on size-dependent cation exchange.

Nano-selenium functionalized zinc oxide nanorods: A superadsorbent for mercury (II) removal from waters

Size-dependent nanocrystal sorbent for copper removal from water

Bis-Schiff base cellulosic nanocrystals for Hg (II) removal from aqueous solution with high adsorptive capacity and sensitive fluorescent response

A Green L-Cysteine Modified Cellulose Nanocrystals Biosorbent for Adsorption of Mercury Ions from Aqueous Solutions

Magnetically Separated and N, S Co-Doped Mesoporous Carbon Microspheres for the Removal of Mercury Ions

A novel hybrid nanoadsorbent for effective Hg2+ adsorption based on zeolitic imidazolate framework (ZIF-90) assembled onto poly acrylic acid capped Fe3O4 nanoparticles and cysteine

A composite adsorbent of ZnS nanoclusters grown in zeolite NaA synthesized from fly ash with a high mercury ion removal efficiency in solution

Different Crystal Forms of ZnS Nanomaterials for the Adsorption of Elemental Mercury

Synthesis of MoS2 nanosheets for mercury speciation analysis by HPLC-UV-HG-AFS

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas.

Nanosized Copper Selenide Functionalized Zeolitic Imidazolate Framework-8 (Cuse/Zif-8) For Efficient Immobilization Of Gas-Phase Elemental Mercury

Preparation of Cysteamine-Modified Cellulose Nanocrystal Adsorbent for Removal of Mercury Ions from Aqueous Solutions

Highly efficient and selective Hg(II) adsorbent: ZnS grown on the surface of 4A zeolite and supported on starch aerogels

Nanosized Zn–In Spinel-Type Sorbents for Elemental Mercury Removal from Flue Gas

ect of Nitrogen Oxides on Elemental Mercury Removal by Nanosized Mineral Sul fi

Immobilization of elemental mercury in non-ferrous metal smelting gas using ZnSe1−xSx nanoparticles

Effect of Nitrogen Oxides on Elemental Mercury Removal by Nanosized Mineral Sulfide

Nanosized ZnIn2S4 Supported on Facet-Engineered CeO2 Nanorods for Efficient Gaseous Elemental Mercury Immobilization

Recyclable CuS sorbent with large mercury adsorption capacity in the presence of SO2 from non-ferrous metal smelting flue gas

Cobalt Sulfide Nanosheets Synthesized by Anion Exchange Method for Efficient Hg0 Removal from Flue Gas