Abstract:Polarization influences on the performance of multi-wavelength Brillouin Er3+-doped fiber laser are investigated by adjusting the polarization controller (PC) in the fiber loop mirror (FLM), where the linear laser cavity is composed of a fiber-tailed mirror and an FLM, and the stimulated Brillouin scattering (SBS) and the Er3+-doped fiber amplification (EDFA) simultaneously serve as the cavity gain. We realized 1–7 Brillouin laser lines by increasing the 980 nm pump power. For the first-order Brillouin laser, the signal–noise ratio (SNR) and optical intensity present a sinusoidal envelope; the conversion efficiency changes significantly from 0.56465 dBm/mw to 0.44975 dBm/mw by adjusting the ring's angle in the PC; the first-order SBS thresholds are 20.4 mw, 36.1 mw and 28.5 mw at different angles θ2 = 36°, 276° and 300°, respectively; flatness between the two Brillouin lasers change obviously from 2.863 dB to 41.801 dB with different ring angles; the second-order Brillouin laser is suppressed and disappears finally at Δθ2 = −64° to −84° and 106°~136° angle variation. For the fifth-order Brillouin laser, the highest-order Brillouin laser line is seriously suppressed until it disappears at some angle variations similarly. The powers and wavelength stabilities for one-, three- and seven-wavelength Brillouin fiber lasers were measured in 1 h, and the obtained Er3+-doped multi-wavelength Brillouin fiber laser (MWBFL) worked stably during that time, but the stabilities become worse with higher SBS orders.

Multiwavelength Fiber Laser Employing A Nonlinear Brillouin Optical Loop Mirror: Experimental and Numerical Studies

Multiwavelength Erbium-Doped Fiber Laser Based on a Nonlinear Amplifying Loop Mirror Assisted by Un-Pumped EDF

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Nonlinear Optical Loop Mirror and Birefringence Fiber Filter

Polarization Influence on Er3+-Doped Multi-Wavelength Brillouin Fiber Laser Based on Fiber Loop Mirror

Multiwavelength Erbium-Doped Fiber Laser Employing Nonlinear Polarization Rotation in A Symmetric Nonlinear Optical Loop Mirror

Experimental and Numerical Study of High Order Stokes Lines in Brillouin-Erbium Fiber Laser

Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Transmission in a Linear Cavity

Widely Tunable Multi-Wavelength Fiber Laser Based on Cascaded Stimulated Brillouin Scattering in A Compact Linear Cavity

Research on Stability and Uniformity of Multi-Wavelength Brillouin-erbium Fiber Laser Based on FWM

Switchable multiwavelength erbium doped fiber laser based on a nonlinear optical loop mirror incorporating multiple fiber Bragg gratings

Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.

Multiwavelength Ytterbium-Brillouin Random Rayleigh Feedback Fiber Laser

A Pump Power Controlled Multiwavelength Fiber Laser with Adjustable Output Channels at Fixed Wavelength

Multi-wavelength Erbium-doped Fiber Laser with Single Mode Fiber and High Nonlinear Fiber

Experimental and numerical evaluation of freely spacing-tunable multiwavelength fiber laser based on two seeding light signals

Flat-amplitude Multiwavelength Brillouin-Raman Fiber Laser in a Linear Cavity Utilizing Cascaded Fibers

Multi-wavelength Erbium-doped fiber laser based on four-wave-mixing effect in single mode fiber and high nonlinear fiber.

Single-frequency Fiber Laser from Linear Cavity with Loop Mirror Filter and Dual-Cascaded FBGs

Individually Switchable and Widely Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Cascaded Mismatching Long-Period Fiber Gratings

Slope efficiency over 30% single-frequency ytterbium-doped fiber laser based on Sagnac loop mirror filter

Flat amplitude multiwavelength Brillouin–Raman random fiber laser with a half-open cavity