Abstract:Polarization influences on the performance of multi-wavelength Brillouin Er3+-doped fiber laser are investigated by adjusting the polarization controller (PC) in the fiber loop mirror (FLM), where the linear laser cavity is composed of a fiber-tailed mirror and an FLM, and the stimulated Brillouin scattering (SBS) and the Er3+-doped fiber amplification (EDFA) simultaneously serve as the cavity gain. We realized 1–7 Brillouin laser lines by increasing the 980 nm pump power. For the first-order Brillouin laser, the signal–noise ratio (SNR) and optical intensity present a sinusoidal envelope; the conversion efficiency changes significantly from 0.56465 dBm/mw to 0.44975 dBm/mw by adjusting the ring's angle in the PC; the first-order SBS thresholds are 20.4 mw, 36.1 mw and 28.5 mw at different angles θ2 = 36°, 276° and 300°, respectively; flatness between the two Brillouin lasers change obviously from 2.863 dB to 41.801 dB with different ring angles; the second-order Brillouin laser is suppressed and disappears finally at Δθ2 = −64° to −84° and 106°~136° angle variation. For the fifth-order Brillouin laser, the highest-order Brillouin laser line is seriously suppressed until it disappears at some angle variations similarly. The powers and wavelength stabilities for one-, three- and seven-wavelength Brillouin fiber lasers were measured in 1 h, and the obtained Er3+-doped multi-wavelength Brillouin fiber laser (MWBFL) worked stably during that time, but the stabilities become worse with higher SBS orders.

Multiwavelength Erbium-Doped Fiber Laser Employing Nonlinear Polarization Rotation in A Symmetric Nonlinear Optical Loop Mirror

Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Transmission in a Linear Cavity

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Multiwavelength Erbium-Doped Fiber Laser Based on a Nonlinear Amplifying Loop Mirror Assisted by Un-Pumped EDF

Multiwavelength Erbium-Doped Fiber Laser Based on Nonlinear Polarization Rotation Assisted by Four-Wave-mixing

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Loss and Intra-Cavity Loss Modulation

Raman Dissipative-soliton Generation with a Nonlinear Optical Loop Mirror in a Polarization Maintaining Fiber Cavity

Switchable multiwavelength erbium doped fiber laser based on a nonlinear optical loop mirror incorporating multiple fiber Bragg gratings

Stable and uniform multiwavelength erbium-doped fiber laser using nonlinear polarization rotation

Multiwavelength Fiber Laser Employing A Nonlinear Brillouin Optical Loop Mirror: Experimental and Numerical Studies

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Stable Multi-Wavelength Erbium-Doped Fiber Laser by Using Dispersion-Shifted Fiber

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Nonlinear Optical Loop Mirror and Birefringence Fiber Filter

Polarization Influence on Er3+-Doped Multi-Wavelength Brillouin Fiber Laser Based on Fiber Loop Mirror

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

A Pump Power Controlled Multiwavelength Fiber Laser with Adjustable Output Channels at Fixed Wavelength

Tunable and Switchable Low-Threshold Multi-Wavelength Erbium-Doped Fiber Pulsed Laser Based on Lyot Filter and NOLM

Stable Multi-Wavelength Erbium-Doped Fiber Laser Based on Dispersion-Shifted Fiber and Sagnac Loop Filter

A Multiwavelength Erbium-Doped Fiber Laser Realized by Controlling the Polarization State

Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.

Tunable and Switchable Dual-Wavelength Tm-doped Mode-Locked Fiber Laser by Nonlinear Polarization Evolution.